Author Topic: Repulsor Carrier [80%]  (Read 2473 times)



Nearing completion! Still needs work on the interior, but that's also close to done.







Just inside the conning tower base


Hallway to the engine, from the inside. WIP


New engine setup w/ bunker that hallway in previous picture leads to


Original OP:
Code: [Select]

Inspired by, but not a copy of the one seen in the Marvel universe. Still WIP, and [b]looking for experienced interior designers to help with the interior. [/b] Or anything else.

[img]http://serverstatus.pecon.us/?h=Conan&t=3[/img]

Intended use: Carrier for a dogfight. Flight deck is a little small, but I decided that I might as well take advantage of the fact that blockland planes are easy to take off.

[img width=900]http://i.imgur.com/CFJNUP7.png[/img]

[img width=900]http://i.imgur.com/WZR4bNu.png[/img]

[img width=900]http://i.imgur.com/5S4ISVp.png[/img]

[img width=900]http://i.imgur.com/Gj49Qfy.png[/img]

[img width=900]http://i.imgur.com/vsA8NoE.png[/img]

Please suggest things to add! For the carrier, or for the dogfight itself.
« Last Edit: June 18, 2015, 04:32:43 PM by Conan »

Put it in a fort wars server!



these parts feel very flat, make them thicker because I wouldn't think that a paper thin platform would be good for support



the floor here seems a tad basic, perhaps try doing something like this? (in the least)


good catch; the flight deck will be thicker; that's already a given.

i'll place some lights on the lower level, but the player's also supposed to go behind the stairs too, so it might be a little misleading.

stay tuned for a huge update; the carrier is vastly different than it was before. sadly i can't guarantee it looks better, but I tried really hard to get it to work out.
« Last Edit: June 12, 2015, 05:56:24 PM by Conan »

Lookin forward to see what ya got conan.

Also, besides the deck being too flat, make it more rounded like the rest of the ship.

Also, besides the deck being too flat, make it more rounded like the rest of the ship.
This too, try using some wedges.

This too, try using some wedges.
Im intentionally keeping this all default. The deck will be rounded out with plates.

Since I'll be out this weekend i thought i might post this update:








It looks amazing. This is the one you PM'd me about?

coooooooool

I never was good at building spaceship-ish things like this :(
mostly cuz i suck at using ramps

anyway sylvanor is really good at interiors try contacting him

It looks amazing. This is the one you PM'd me about?
Yep! Im designing it for use with the MAS swarm fighter and MAS interceptor, which should support more aerial combat and aerial ground support rather than just a means to get to the islands to fight. Might need some rebalancing of the weapons on each vehicle, though.


Yep! Im designing it for use with the MAS swarm fighter and MAS interceptor, which should support more aerial combat and aerial ground support rather than just a means to get to the islands to fight. Might need some rebalancing of the weapons on each vehicle, though.

I've always wanted an excuse to use all the MAS vehicles! Be sure to add a place for the transport, too.