To all people with issues Exporting from blender 2.6x, Here's the solution to exporting it and letting it function.
Step 1.
Remove the camera and light from the scene
Step 2.
Use These Options when exporting*
Step 3.
Run the program
Step 4
Enjoy
(The tiny and verticle issue was my fault.**)
*Change Up to whatever direction is the top of your model, and front to whatever the front of your model is. Make sure you also selected all your meshes!
**Make sure you use CTRL A to apply any scaling and rotations you made.
Side note: A Standard 1x1 Brick (Not a plate!) is
.5,
.5,
.6 Blender units.
THESE ARE THE DIMENSIONS! NOT THE SCALE!