Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - RallyBlock

Pages: [1] 2 3
1


Made space the same shade as text so they blend

Easy fix, I don't know if somebody has done this already, I looked all over the forums and didn't find anything

Remember to disable default letters and enable this, I could've had it replace the letters entirely but it's nice to be able to switch back if something goes wrong

Download

2
Add-Ons / [Brick]8x8 Terrain path bricks for 4x4 cube terrain style
« on: October 05, 2022, 09:01:31 PM »
Brick_TerrainPaths & Brick_TerrainPathlovetension
Version 1.0.0



I've always liked the look of 8x8 modter with the 4x4 cube terrain as paths, but I also always hated having to load up the modter pack just to use 2 bricks out of it.

Now all you have to do is load up either or both of these packs as they work together, I wasn't sure if people would want them on the water layer so I made both,
you can use both packs at the same time or separately. It's entirely up to you.

Bricks are under baseplate / Terrain Paths

The pack contains the typical 8x8x10 and ramp, but also contains a lot of fillers which would probably be useful for terrain building.

Brick_TerrainPaths
Normal pack


Brick_TerrainPathlovetension
Waterlayer pack



3
Add-Ons / RallyBlock's Semi-finished Addon Dump
« on: September 10, 2019, 09:30:31 PM »
RallyBlock's Semi-finished Addon Dump

This topic is going to be where I dump my addons that had more plans but are releasable, I probably will not be finishing these up completely with the plans I had with them as it seems Brickadia has killed off Blockland over the weekend, I expect Brickadia to die again as it did before due to lack of things to do but to see the master server player list go so low for a good amount of time I don't know if its worth it to keep making addons.

Note: Some of these addons will come with a "Blends" folder for anybody that wants to see how they were made or wanted to continue them.

Offset Print Bricks

This allows you to center your prints, sometimes you would run into an issue where the number of print bricks you had was an odd number and it would be offset. It also allows having prints go around an edge smoothly. I was planning to do more with the other print brick styles people have made but I didn't get around to it.



Downloads
Dropbox
Leopard Hosting

Port's Surf Bricks

Near the end of Port's surf server, I had made this brick pack to improve map-making for the game and had several plans for other bricks to make but Port closed the server to work on either Viridian or his survival server, I can't remember what happened really. These were never released and I only think a few people know of there existence, I don't have the player type to go with it.



Downloads
Dropbox
Leopard Hosting

Barrels Revamped

A long time ago I made a brick pack full of barrels, it was like one of the first brick add-ons I made. This was meant to replace that, the barrels can be stacked neatly and they also look better than the old ones. I think I had more stuff planned but I don't remember what exactly.



Downloads
Dropbox
Leopard Hosting

Land of Blocks 2 (Bricks)

I made a pack of bricks for Elm's Land of Blocks 2 that we were working on, I figured I might as well release what I had maybe somebody will find a use for them. The ores can be painted to match any color of ore, the trees are Elm's old trees but I revamped them and made stumps.



Downloads
Dropbox
Leopard Hosting

Makeshift Planets

A long time ago a suggestion thread opened up asking for planet bricks and if it was possible, after seeing multiple people saying it wasn't I went into action and made a set. This is a way better version then what I made back then on that topic, I had planned to make 32x and 64x versions aswell. The way this works is you place the main 16x planet base and work your way down, you place everything under the 16x base brick in this order; 16x Planet Base, 16x Planet Stratosphere, 16x Planet thermosphere, 16x planet Ring, and 16x Planet Moon.



Downloads
Dropbox
Leopard Hosting

Farm Truck

This has been remodeled so many times and was probably going to go through even more revisions before I got it to the finished state that I wanted it, I had a ton of plans for this truck but I never got around to doing it. The truck fully works, it just isn't as fancy as vehicles on Blockland today, it is very basic as is.



Downloads
Dropbox
Leopard Hosting

If I find more I'll post.

4
Add-Ons / [Weapon]Snowball Minigun
« on: September 01, 2019, 05:38:15 AM »
Snowball Minigun
Version 1.0.0

A stylish minigun that shoots snowballs.


p3d link

Has some nice animations, is pretty basic shoots snowballs when holding left click.
Has a random chance of getting obtained in thebrighterdark's randomizer.

Blockland Glass
Leopard Hosting
Dropbox

5
Add-Ons / [Vehicle] Blocko Dirt Bike
« on: August 14, 2019, 11:34:47 PM »
Blocko Dirt Bike
Version 1.0.0




This is based on the lego dirt bike that was first introduced in 2007, it's not a direct copy but it's similar while trying to use the Blockland style.

This uses 2 wheels instead of 4 hidden wheels like most typical bikes for Blockland has, it uses a mass offset to allow it to balance itself on 2 wheels.
It handles pretty well for what it is I think so, I'm planning to do more updates on this thing in the future I just wanted to see what kind of feedback it would get at its current stage.

Code: [Select]
Planned Features

Add Teneski's vehicle customization
Add all the different lego colors of each part
Add some stunts like Rally's skateboard
Add sidecar version


Blockland Glass
DropBox
Leopard Hosting

6
Suggestions & Requests / [req] ghost brick auto rotation
« on: July 21, 2019, 10:40:16 PM »
could somebody make like a client addon that automatically rotates your ghost brick in a random fashion for like placing nature bricks? I normally don't mind doing this manually, but I have to reforest a whole map this time and I think this would speed up the process and also be very useful.


7
Add-Ons / Small update for Brick_Default_Fence_Extras
« on: May 26, 2019, 01:21:31 AM »
Original Topic

Update contains 3 new bricks.
Code: [Select]
Version 2.0.3 Changelog;

Added 1x3x5fencevert
Added 1x3x5fencevertround
Added 6heightfencevertpointed2

As requested by UngaBunga



Added just cause



Dropbox link on original topic is updated to the latest but I'll still supply a link below

Dropbox(Direct)
Blockland Glass

8
Suggestions & Requests / Does anybody have the latest medieval props pack?
« on: February 22, 2019, 06:08:51 PM »
I've been looking around through the archives and different forum topics and they all seem to be the V5 version of medieval misc that doesn't have the furnace or the tanning rack like this pack from pass had.

Pass created two topics with that pack of 31 but both links are dead.

Edit: Nvm I got it, locking.

9
Add-Ons / [Bricks] Emil's Tile Plates Remastered
« on: February 17, 2019, 08:52:41 PM »
Emil's Tile Plates Remastered

Warning: Before I say anything this pack overwrites Emil's tile plates, but it's supposed to do that because I want this to replace Emil's original pack.

As said multiple times already, this pack was originally created by Emil and edited and remastered by me, RallyBlock to what it is now.
The changes I made to Emil's bricks were fixing the bottom textures to have the same rotation on all bricks and fixing the side textures to a more default look.



Tile plates contain the same bricks that Emil's pack contained just textured differently to fix any flaws that the old pack had.



Seamless Tiles was originally going to go with Tile Plates, but were removed and made standalone due to the pack being to big with the two together and players can have a choice of one or the other this way or both.

Preview


I just want to say again, this pack was originally made by Emil I'm not trying to take his thunder or anything I just use this pack quite often and have always
wanted to fix things inside the pack. I haven't asked Emil if I could do this but I hope if hes still around or comes back he will be cool with it.

Change-Log(Tile Plates)
    1.0.0
    • Fixed all side texture uv-mapping
    • Fixed all bottoms to have the same rotation of the top texture
    • Added Seamless Tiles to the pack
    1.0.1
    • Removed Seamless Tiles from the pack and made it its own
    1.0.6
    • Added 1x5F_Tile
    • 1x7F_Tile
    • 1x9F_Tile
    • 1x10F_Tile
    • 3x4F_Tile
    • Renamed some icons to match others, shouldn't effect loading saves with these bricks already placed

Downloads

Brick_TilePlates
Dropbox(Direct)
Blockland Glass

Brick_SeamlessTiles
Dropbox(Direct)
Blockland Glass

Tile Plates will load perfectly fine on builds that already contain Emils pack, I didn't mess with the way Emil had these orientated just fixed texture issues and added more to the pack.

If you notice any issues please let me know.[/list]

10
Environment Files / Pixelated Clouds
« on: February 01, 2019, 09:00:30 PM »
Made this out of boredom and just wanted to mess with environments since I really haven't that much.


The clouds move and the enviroment settings were messed with to have more of a glow.
Nothing else to say really, here's the dl;

Blockland Glass

11
Gallery / paintfx trick
« on: January 30, 2019, 11:24:07 AM »
I'm not sure if this is the right place to put this little building tutorial but I guess I'll find out.

There is a little trick to get a brick to turn its rendering off without the light source being effected, I've noticed that a lot of people actually don't know about this trick so I figured I'd post it.

Many people know that if you turn off rendering on a brick the light source on the brick will disappear with it, as previewed;


So people usually just give it the fully transparent color, which worked before shaders but now you can see them somewhat easily;
(usually even easier then the previews if you use different skybox lighting but I was on DragonoidSlayers Steampunk and couldn't change it.)


So if you just do one more step and give that brick an fx after you give it the completely transparent color it should totally turn its rendering off without effecting the light source as previewed;


Doing it this way completely makes sure that players will not see the brick that's emitting light, which is great for dynamic lighting.
Feel free to keep doing this your own way, I just thought I'd share.

12
Add-Ons / [Brick] Plate Walls
« on: January 25, 2019, 11:15:17 AM »
Plate Walls

Brick pack for people that want to create different colored walls in a house without the need to use 2 brick studs thick walls, these can be placed inside each other and painted with ease. Pack contains x2, x3, x4, x5, and x6 height plate walls and are all inside the plate tab. All the bricks have icons as well.

Preview;


If anybody uses this pack and can take a screenshot of these in use please send it to me so I can post it here for people to see.

Dropbox(Direct)
Blockland Glass


13
Add-Ons / [Sports]Badminton
« on: December 21, 2018, 01:01:31 AM »
Badminton



Was basically a straight rip of Carbon Zyphers tennis racquet all credit goes to him, was edited by me and Simba to be what it is now. Has a birdie and badminton racquets, the issue with the tennis racquet where you could spam tennis balls was fixed for this, and the birdie has different physics then the tennis ball.

Me and Simba had a few rounds of badminton and its actually pretty fun, might make more stuff like this in the future.

Direct Download
Glass Download

14
Add-Ons / [Brick] Body Parts
« on: March 18, 2018, 08:57:07 PM »
Body Parts

Basic body parts from the blockhead player model and Smooth's and Phydeox's skeleton chest. This pack contains various rotations of these said body parts.

Preview(Photo Credit to Lord Tony);



This pack requires for you to download a couple print packs in order for you to get full use out of them;

Print_Faces_BodyParts
Print_Decals_BodyParts

And for the actual pack;

Brick_BodyParts


15
Add-Ons / [Brick] Half Arches and Inverted Round Edges
« on: February 13, 2018, 11:45:34 PM »
Brick pack of Half Arches

This is a pack of the default arches that were either cut in half or fused together to form a T shape.

This pack has correct UV-mapping to my ability and correct .dts collision.

This pack consists of;

Code: [Select]
1x2halfarch
1x2halfarchup
1x3doublehalfarch
1x3doublehalfarchup
1x1choppedhalfarch
1x1choppedhalfarchup

1x3halfarch
1x3halfarchup
1x5doublehalfarch
1x5doublehalfarchup
1x2choppedhalfarch
1x2choppedhalfarchup

1x3x2halfarch
1x3x2halfarchup
1x5x2doublehalfarch
1x5x2doublehalfarchup
1x2x2choppedhalfarch
1x2x2choppedhalfarchup

1x4x3halfarch
1x4x3halfarchup
1x7x3doublehalfarch
1x7x3doublehalfarchup
1x3x3choppedhalfarch
1x3x3choppedhalfarchup


Preview





Please feel free to post screenshots of these in action, I feel these screenshots don't show them much justice



Downloads



               






Pages: [1] 2 3