| Blockland Forums > Help |
| Port forwarding = Fuuuuuuu- |
| (1/3) > >> |
| Plasmus:
I have a wireless internet on a lynksis router, I keep googling, But i get nothing helpful, When i type in http://192.168.1.1, It brings up my DADS modem/router/whatevertheforgetitis And i found out that 10.10.10.1 is the REAL thing for my router, I know what to do, But then i type in my IP address (10.10.10.1) and it doesnt work, So here's what im doing in pictures: Amidoinitright? nopeguessnot |
| Blastdown:
24000? I recall it being 28000. |
| Plasmus:
It was just an example. |
| Devvy:
Here's what you do: Go to start > Run > Type in cmd Then type ipconfig then look for the IPv4 Address. That's the IP address you should enter at the port forwarding page to do it right. 28000 - 28030 Both protocols. |
| Plasmus:
--- Quote from: Devvy on March 28, 2010, 04:12:38 PM ---Here's what you do: Go to start > Run > Type in cmd Then type ipconfig then look for the IPv4 Address. That's the IP address you should enter at the port forwarding page to do it right. 28000 - 28030 Both protocols. --- End quote --- Thanks, Ill try that. |
| Navigation |
| Message Index |
| Next page |