Blockland Forums > Help
"Locked" Server
Audax:
--- Quote from: mctwist on April 09, 2010, 04:06:04 PM ---You have broadband or dial-up?
--- End quote ---
Broadband. I have a DSL Modem (Westell6100) with a Wireless - N Broadband Linksys Router (WRT160N).
mctwist:
Then, only touch your router to change the routing(portforwarding) of port 28000 to IP 192.168.1.101 on port 28000. Then change the IP on your computer to 192.168.1.101 as well.
Audax:
But my Router's IP is diffrent from my Computer's IP.
Modem - 192.168.1.1
Router - 192.168.0.1
mctwist:
Wait I think I see your problem here. You need both of them to be on 192.168.1.*. If you cannot setup the modem, then setup the Router to 192.168.1.2 or something like that. Then setup your computer against that too, 192.168.1.100.
Audax:
--- Quote from: mctwist on April 10, 2010, 05:13:25 AM ---Wait I think I see your problem here. You need both of them to be on 192.168.1.*. If you cannot setup the modem, then setup the Router to 192.168.1.2 or something like that. Then setup your computer against that too, 192.168.1.100.
--- End quote ---
Ok, I kept my modem at 192.168.1.1 and went to my router page and changed the IP Address to 192.168.1.2. After I had done that I could no longer connect to the internet and needed to put it back to 192.168.0.1. Did I also need to se my Starting IP Address to 192.168.1.100? It was 192.168.1.1 after I changed my router to 192.168.1.2.