Blockland Forums > Modification Help
brick model scale
Blastdown:
--- Quote from: Furling on October 08, 2010, 01:06:09 PM ---I need any kind brick size format into milkshape.
5(x) 2(y) 5(z) would be a 1x1f brick in Milkshape 3D. 5x6x5 being a normal 1x1 brick
something like that.
--- End quote ---
If I read you correctly, I gave you the size for Milkshape.
"5(x) 2(y) 5(z) would be a 1x1f brick in Milkshape 3D. 5x6x5 being a normal 1x1 brick"
That is the size for the mini boxes on the grid in Milkshape.
This is an example of the 1x1 brick.
Furling:
I not see brickTOP in that model (purple top), there no texture.
How I enable it to see texture on that top ? and how I can set texture on each sides, like top, side, bottom ?
I plan using this brick scale for my rail tracks.
TheKhoz:
--- Quote from: Furling on October 12, 2010, 07:48:45 PM ---
--- End quote ---
Make sure you are in Texture mode. Right Click, then set the check to Textured. Other than that, I don't know what could be wrong.
Furling:
--- Quote from: TheKhoz on October 12, 2010, 08:55:38 PM ---Make sure you are in Texture mode. Right Click, then set the check to Textured. Other than that, I don't know what could be wrong.
--- End quote ---
failed.