| Blockland Forums > Gallery |
| The Encyclopedia of Blockland Builds and Techniques [Image Heavy] |
| << < (2/7) > >> |
| Conan:
--- Quote from: -Red- on October 19, 2010, 07:47:08 PM ---Then I will make a tutorial on how to find the pole bricks. Anything can be taught these days ya know. And yes, Please do post the pic, I can build it from the pic, Break it into steps and add it. --- End quote --- Oh, and as a suggestion... --- Quote from: -Red- on October 19, 2010, 07:17:44 PM ---The Encyclopedia of Blockland Builds and How To Do ThemI saw another topic recently called "Blockland Building Encyclopedia" It was a very good idea, though there weren't many pictures going up, and the ones that were, were just pictures, no description or instructions at all. So I decided to open up another topic which actually does what it says it will do. The Basic Sofa [For New Players, so don't flame if it's easy.] Start off with 16x16 base and place 4 1x1F poles in the locations shown. Then place a 4x8 plate ontop matching each corner to the poles. Then place 3 2x3 plates in a slightly different shade ontop to give us a mixture of colours and make our cussions. Then place 2 1x4 bricks parralel to each other on either side. After that fill in the inbetween space with a 1x6 brick. Use another 1x6 brick above the last on you just placed and place 2 25* 1x ramps on either side sloping down towards the front. Add your final touch, A 1x8 plate going across the top joining the back together and your done, Here are some edits I made quickly. Ramps sloping right down to the base of the sofa. An ancient greek designer touch to really spice up your build. The Single Bed [For New Players, so don't flame if it's easy.] Start off with a 16x16 baseplate and place 4 1x1 poles in the locations shown. Add a 4x6 plate, this will be the matress and matress cover for our bed. Place a 25* 2x ramp in the middle of at the very end of the bed, and place a 4x4 plate to be our duvet. Place a 2 25* crest ends on either side of the 25* 2x ramp and there you have your finished bed. The Double Bed [For New Players, so don't flame if it's easy.] To make this simply widen the single bed to a 6x6 radius and change the pillow centres to a 25* 2x1 ramp. Then simply place 4 25* crest ends at either sides of them to make the pillow shape. Office Collection: Desk [Some New Looks for Your House or Office Builds] Start off with 2 1x rounds and 1 2x3 plate in the locations shown. Place 1 1x2 brick ontop of the rounds, a 1x3 brick to the back of the 2x3 plate, 1x1 bricks on either side of the plate and 1 print with a minus/dash. Repeat the previous step and it should look like this. Finaly, Place a 2x6 plate and that's your desk. Office Collection: Chair [Some New Looks for Your House or Office Builds] Place 4 1x1 rounds in the locations shown. Add a 1x3 brick going across and 2 1x1 plates to cover up the other 2 rounds. Add 2 more 1x1 rounds above each other and behind them 2 more 1x1 plates. Add a 1x1 brick ontop of the two 1x1 plates and a 2x3 plate for where you will sit. Set rendering, collision and ray casting off on the 2 1x1 plates supporting the 1x1 brick. Add the backrest with 2 1x3 plates and there's your Office Chair. To be added: Basic Detailed House for New Players More in the Office Collection Your stuff! Please post your own building instructions with pics bellow for me to ad to the OP. --- End quote --- |
| -Red-:
--- Quote from: Conan on October 19, 2010, 07:51:37 PM ---Oh, and as a suggestion... --- End quote --- How do you resize them directly off the forums? |
| Conan:
--- Quote from: -Red- on October 19, 2010, 07:54:58 PM ---How do you resize them directly off the forums? --- End quote --- --- Code: ---[center][u][b]The Encyclopedia of Blockland Builds and How To Do Them[/b][/u][/center] I saw another topic recently called "Blockland Building Encyclopedia" It was a very good idea, though there weren't many pictures going up, and the ones that were, were just pictures, no description or instructions at all. So I decided to open up another topic which actually does what it says it will do. [u][b]The Basic Sofa [For New Players, so don't flame if it's easy.][/b][/u] [img width=100]http://img829.imageshack.us/img829/8925/blockland00115.jpg[/img] Start off with 16x16 base and place 4 1x1F poles in the locations shown. [img width=100]http://img407.imageshack.us/img407/2166/blockland00116.jpg[/img] Then place a 4x8 plate ontop matching each corner to the poles. Then place 3 2x3 plates in a slightly different shade ontop to give us a mixture of colours and make our cussions. [img width=100]http://img138.imageshack.us/img138/1097/blockland00117.jpg[/img] Then place 2 1x4 bricks parralel to each other on either side. After that fill in the inbetween space with a 1x6 brick. [img width=100]http://img508.imageshack.us/img508/4396/blockland00118.jpg[/img] Use another 1x6 brick above the last on you just placed and place 2 25* 1x ramps on either side sloping down towards the front. [img width=100]http://img130.imageshack.us/img130/3470/blockland00119.jpg[/img] Add your final touch, A 1x8 plate going across the top joining the back together and your done, Here are some edits I made quickly. [img width=100]http://img100.imageshack.us/img100/6811/blockland00120.jpg[/img] Ramps sloping right down to the base of the sofa. [img width=100]http://img580.imageshack.us/img580/2299/blockland00121.jpg[/img] An ancient greek designer touch to really spice up your build. [u][b]The Single Bed [For New Players, so don't flame if it's easy.][/b][/u] [img width=100]http://img709.imageshack.us/img709/6774/blockland00126.jpg[/img] Start off with a 16x16 baseplate and place 4 1x1 poles in the locations shown. [img width=100]http://img837.imageshack.us/img837/8810/blockland00127.jpg[/img] Add a 4x6 plate, this will be the matress and matress cover for our bed. [img width=100]http://img835.imageshack.us/img835/7205/blockland00128.jpg[/img] Place a 25* 2x ramp in the middle of at the very end of the bed, and place a 4x4 plate to be our duvet. [img width=100]http://img101.imageshack.us/img101/6760/blockland00129.jpg[/img] Place a 2 25* crest ends on either side of the 25* 2x ramp and there you have your finished bed. [u][b]The Double Bed [For New Players, so don't flame if it's easy.][/b][/u] [img width=100]http://img534.imageshack.us/img534/1349/blockland00132v.jpg[/img] To make this simply widen the single bed to a 6x6 radius and change the pillow centres to a 25* 2x1 ramp. [img width=100]http://img229.imageshack.us/img229/8292/blockland00133.jpg[/img] Then simply place 4 25* crest ends at either sides of them to make the pillow shape. [u][b]Office Collection: Desk [Some New Looks for Your House or Office Builds][/b][/u] [img width=100]http://img249.imageshack.us/img249/8766/blockland00134.jpg[/img] Start off with 2 1x rounds and 1 2x3 plate in the locations shown. [img width=100]http://img252.imageshack.us/img252/2924/blockland00135.jpg[/img] Place 1 1x2 brick ontop of the rounds, a 1x3 brick to the back of the 2x3 plate, 1x1 bricks on either side of the plate and 1 print with a minus/dash. [img width=100]http://img203.imageshack.us/img203/1273/blockland00136.jpg[/img] Repeat the previous step and it should look like this. [img width=100]http://img217.imageshack.us/img217/6144/blockland00137.jpg[/img] Finaly, Place a 2x6 plate and that's your desk. [u][b]Office Collection: Chair [Some New Looks for Your House or Office Builds][/b][/u] [img width=100]http://img199.imageshack.us/img199/7837/blockland00138.jpg[/img] Place 4 1x1 rounds in the locations shown. [img width=100]http://img821.imageshack.us/img821/8452/blockland00139.jpg[/img] Add a 1x3 brick going across and 2 1x1 plates to cover up the other 2 rounds. [img width=100]http://img89.imageshack.us/img89/9/blockland00140.jpg[/img] Add 2 more 1x1 rounds above each other and behind them 2 more 1x1 plates. [img width=100]http://img821.imageshack.us/img821/1668/blockland00141.jpg[/img] Add a 1x1 brick ontop of the two 1x1 plates and a 2x3 plate for where you will sit. [img width=100]http://img443.imageshack.us/img443/5403/blockland00142.jpg[/img] Set rendering, collision and ray casting off on the 2 1x1 plates supporting the 1x1 brick. [img width=100]http://img541.imageshack.us/img541/7576/blockland00143.jpg[/img] Add the backrest with 2 1x3 plates and there's your Office Chair. To be added: Basic Detailed House for New Players More in the Office Collection Your stuff! Please post your own building instructions with pics bellow for me to ad to the OP. --- End code --- |
| -Red-:
Thanks, But can you edit those last two posts of yours? I want to get rid of the page streeeeeeeetch. Lol. |
| -Red-:
[Added new office shelf tut] |
| Navigation |
| Message Index |
| Next page |
| Previous page |