Blockland Forums > General Discussion
BL Needs a cave map!
hudgat:
--- Quote from: Sony on December 08, 2010, 01:19:33 PM ---Build a cave asadsadadas
--- End quote ---
--- Quote from: TheArmyGuy on December 08, 2010, 01:33:22 PM ---Trust issues.
--- End quote ---
Indeed.
PowerDag:
Due to Torque's terrain system, both old and current, the only way you can make a cave map is to use interiors, which are high-poly and difficult to accurately make a collision map for.
phydeoux:
--- Quote from: PowerDag on December 08, 2010, 02:16:33 PM ---Due to Torque's terrain system, both old and current, the only way you can make a cave map is to use interiors, which are high-poly and difficult to accurately make a collision map for.
--- End quote ---
Um, not really. If you're terrible at creating interiors then yeah, otherwise using interiors is just fine.
The only real problem is that you cannot have the cave with any terrain. Why?
Well lets say you create a cave interior, then start a map and make a large mountain side to put your cave in. You can delete a square of the terrain which will allow you to go directly through the terrain block. Then you align your cave with that empty square and voila you have a cave. However you will not be able to build inside this cave. Every brick you try to place will receive the "Stuck" error, because everything is inside the mountain.
So if anyone makes a cave map, it will have to be just an interior floating in space.
DrenDran:
--- Quote from: TheArmyGuy on December 08, 2010, 01:33:22 PM ---Trust issues.
--- End quote ---
Override trust checks.
6rengun10:
Thanks for the positive posts, first good ones i got on a post! and well, if i was good at map making, id make 1 myself, but i tried to make a map, it didn't work out so good.......once again, thanks!