Blockland Forums > General Discussion
An experiment with print bricks and water.
Joekirk:
I didn't know if I should put this in gallery, or in general discussion as its not really a build. Anyway, on with the topic.
So, I've been using the four high print bricks as windows for awhile, but the thought just popped in my head what if I use print bricks and the water shape FX for water?
And so I did. This is the result,
Normal water:
Print bricks with water shape FX, placed on top of water:
The water with the print bricks looks better, in my opinion.
However, it is a little spammy as I didn't have any large print bricks to use.
Just thought I'd share, discuss.
TheKhoz:
Meh, seems alright.
Masterlegodude:
Rookie taught me this neat trick with a bunch of transparent 1x1's in front of transparent (but colored) 1x#x5 bricks :D
Cyanian:
Looks good.
Never thought of this.
Pulchritude:
It's been done before, but typically on water that's one third of a brick deep, as when you get under it and look up you can see all the individual bricks.