Blockland Forums > Help
Macros
Bustos:
What are these I see people using them nd they get there work done fast?
Spartan300:
First off, go to you controls.
Ctrl O > At the top click Controls.
Scroll down on the left until you see the following, or something like that:
- Start macro recording
- Playback macro
Set a button for each one of them.
Let's say I use:
- Start macro recording = W
- Playback macro = R
I would lay down a ghost brick.
Press W to start recording.
At this point, you may move the brick and build, and Blockland will record it.
Here is what you should NOT do when recording a macro.
- Change your view
- place or move a brick when not in the original view started
- Hammer a brick
- Use the spray can to directly color a brick
Use Undo to delete the brick instead of hammering it, and switch paint can colors before placing a brick in order to color it.
After your done placing your bricks, Press W again.
At this point the recording stops.
Lay down the ghost brick the same way you did when you started, and where you want the built to be.
press R, and the build will be built, don't rotate your view while the build is building.
If you are Admin macros work faster.
Good luck!
FrAgGEr:
--- Quote from: Spartan300 on June 28, 2007, 02:20:25 PM ---
Let's say I use:
- Start macro recording = W
--- End quote ---
Erm..isnt W walking forward lol?
Spartan300:
--- Quote from: FrAgGEr on June 28, 2007, 02:22:28 PM ---
--- Quote from: Spartan300 on June 28, 2007, 02:20:25 PM ---
Let's say I use:
- Start macro recording = W
--- End quote ---
Erm..isnt W walking forward lol?
--- End quote ---
Yes, that was just an example.
Spartan300:
Someone should sticky that guide.