Could you make a half brick in blockland?

Blockland Forums > Suggestions & Requests

<< < (5/7) > >>

Evar678:

--- Quote from: Peejster on June 26, 2012, 05:41:16 PM ---OP wants them to be different colors, I imagine.

--- End quote ---

--- Quote from: Night Fox on June 26, 2012, 05:38:39 PM ---OP
why would you want to put two in the same spot anyway?
just use a regular plate for that

--- End quote ---
No, and no. He wants them for Comblock, so we can make smaller computers. Our computer parts are 1x1 studs, and a computer generally has 6-7 parts to it. Having this would halve the size of our computers.

Albiet true we could simply event the bricks that the computer itself is made up of, alot of our computers use relays and require hardware bricks to be in close proximity.

Night Fox:

--- Quote from: Evar678 on June 26, 2012, 09:34:46 PM ---alot of our computers use relays and require hardware bricks to be in close proximity

--- End quote ---
or you could target a named brick for the relay and not even worry about it having to be next to the target

also:

(ignore the quality. I guess I forgot to make it take png screenshots)

17 usable bricks, not including a power button
that's twice what you said you needed
and if you want it really small, use just the white parts; that's exactly seven
why would it need to be any smaller?

Marinax:
we could just make stuff like Port's System_Quar which makes pixels really small. kind of like 8 bit. it's good but Port will not release it.

Ipquarx:

--- Quote from: Marinax on June 27, 2012, 11:11:26 AM ---we could just make stuff like Port's System_Quar which makes pixels really small. kind of like 8 bit. it's good but Port will not release it.

--- End quote ---
I thought it just colored the 1x1's.

Chrono:
If you're going to take the time to script a tiny brick, you might as well script the system.

Navigation

 Message Index

Go to full version