| Blockland Forums > Help |
| Port Foward help? |
| << < (3/7) > >> |
| sojolala:
Hope this is what you are looking for. (attachment too big) Starting Internet Server Binding server port to default IP UDP initialized on port 28000 Initializing UPnP... -------------------- List of UPNP devices found on the network : desc: http://192.168.1.1:5000/Public_UPNP_gatedesc.xml st: urn:schemas-upnp-org:device:InternetGatewayDevice:1 Found valid IGD : http://192.168.1.1:5000/Public_UPNP_C5 Local LAN ip address : 127.0.0.1 ExternalIPAddress = 24.45.33.185 AddPortMapping(28000, 28000, 127.0.0.1) failed with code 718 (ConflictInMappingEntry) Binding server port to default IP UDP initialized on port 28100 Initializing UPnP... -------------------- List of UPNP devices found on the network : desc: http://192.168.1.1:5000/Public_UPNP_gatedesc.xml st: urn:schemas-upnp-org:device:InternetGatewayDevice:1 Found valid IGD : http://192.168.1.1:5000/Public_UPNP_C5 Local LAN ip address : 127.0.0.1 ExternalIPAddress = 24.45.33.185 Internal IP:Port = 127.0.0.1:28100 External 24.45.33.185:28100 UDP is redirected to internal 127.0.0.1:28100 |
| Elecro:
The gateways are different on different router brands. to find yours, type cmd into start bar, press enter, the command prompt should pop up, type in "ipconfig", find "Default Gateway" and enter that into your browser and you should be redirected to your router's page if you don't have a password. NOTE: If you don't have a password for your router, type in the username, "admin", and the password, "password", this works for most router brands. I hope I explained this clear enough. |
| sojolala:
--- Quote from: Elecro on March 12, 2013, 07:37:56 PM ---The gateways are different on different router brands. to find yours, type cmd into start bar, press enter, the command prompt should pop up, type in "ipconfig", find "Default Gateway" and enter that into your browser and you should be redirected to your router's page if you don't have a password. NOTE: If you don't have a password for your router, type in the username, "admin", and the password, "password", this works for most router brands. I hope I explained this clear enough. --- End quote --- http://prntscr.com/w3ia4 This is a quick photo of what I got. Click link. Didn't have time to upload. |
| Elecro:
Do you have some other program that could be blocking port 80 such as a firewall? try disabling your firewall. |
| Headcrab Zombie:
Try a different browser; a friend of mine had the same problem with Chrome |
| Navigation |
| Message Index |
| Next page |
| Previous page |