Blockland Forums > General Discussion
Your Own Building Code
Paradon:
I use as little custom bricks as possible and I've never loving ever used a brick from a filler brick pack.
If you have to use filler bricks when building, you aren't trying hard enough.
(though there are some bricks that I would like to be a part of the default brickset)
Legodude77:
My main rule: All brick edges must over lap, no two bricks on top of each other should end at the same point. If I were to build the walls out of lego and pushed it then nothing should happen.
st8terblock:
--- Quote from: CharlesSpeaking on January 03, 2014, 01:39:58 AM ---#1 - who cares if it uses a lot of bricks i just want to make it beautiful as i am capable of
#2 - NEVER get ANYTHING done
--- End quote ---
yup
morningstar:
I make a template first on the floor of what I want where.
* Yellow is for walls
* Red is something I'll delete
* Green or blue means a permanent floor
Most rooms are 7 bricks tall, but for fancy things I use 8-10 height and basements are often 6.
--- Quote from: Legodude77 on January 03, 2014, 02:05:20 PM ---All brick edges must over lap, no two bricks on top of each other should end at the same point.
--- End quote ---
--- Quote from: Bester Bageler on January 02, 2014, 06:50:29 PM ---Invisible Bricks - do not use unless absolutely necessary as in there is absolutely no other way. The only time it is ok to use them is for hiding spawns and emitter effects.
Wall height - Walls should have at least 2 extra plates added to them, one for the floor and one for the roof. Walls should be a minimum of 7 bricks high
--- End quote ---
Epicduke:
build in private and only invite niff so people won't judge my stuff :(