Car material print

[-HAD-]

Since I was currently building a touring car , I required a carbon fiber print for 1x1 , 2x2 , (Im not so sure if these also work for the vertical plate pack / Brick_VerticalPlatePack) well its not so important so I don't mind it being done , but i'd be lucky if someone does make one.

If you don't know what carbon fiber is .. then search it.

[Ad Bot]

[V. Quinn]

I went ahead and used Google Images to try to understand what carbon fiber is supposed to look like. I made prints for both 1x1 and 2x2 as you requested, and they are able to seamlessly tile together. Also, it is transparent, just incase you wanted it to work with colors other than black, but the images I found all were on black, so it was designed to work best on dark colors. If I misunderstood what I found on Google Images, just let me know so I can make sure I fulfill your request properly.

Print_1x1f_CarbonFiber.zip
Print_2x2f_CarbonFiber.zip

The following image shows a 2x2f, four 1x1fs, and another 2x2f, all with the print.

[-HAD-]

Thanks for your time and effort for creating this.