Author Topic: Events clearing all the time.  (Read 1079 times)

Every time I load a map on my server, the events clear, so there are doors that won't move and stuff like that, and when I try to make events the instantly clear, same happens when someone else tries to make events.

Are you using the Steam Version of Blockland?

Double Post
Well if you are most likely it's because of either
too many addons or
Broken Addons


Doesn't work, need help again.





make sure save wrench events is checked





make sure save wrench events is checked
and when I try to make events the instantly clear, same happens when someone else tries to make events.

Start your server, type trace(1); in console, replicate the problem, close blockland and post console.log

REQURED ADD-ON: Event_Variables is not found! Will not execute.

Could this be the problem?

REQURED ADD-ON: Event_Variables is not found! Will not execute.

Could this be the problem?
Depends, do what I posted above

Depends, do what I posted above
Well I don't really know what you mean by "replicate the problem"

Well I don't really know what you mean by "replicate the problem"

apply an event and make sure it vanished

apply an event and make sure it vanished
done it loads of times.

done it loads of times.
Do all steps in order, without a trace of applying an event and it vanishing we can't tell you what's doing it.

since you don't understand zeblote's instructions, i'll try to clarify?

1. start the server
2. press ` to access the console
3. type trace(1); into the console
4. exit the console with `
5. wrench a brick
6. go to events
7. make events
8. click send
9. wrench the same brick
10. go to events
11. check to make sure there is nothing there
12. escape out or click send
13. press ` to access the console
14. type trace(0); into the console
15. press ` to close the console
16. press escape to access the escape menu
17. click quit
18. go to your blockland directory
19. open console.log
20. press ctrl a to select everything
21. press ctrl c to copy the selection
22. go to www.pastebin.com
23. click the big white text box
24. press ctrl v to paste
25. click submit
26. click the box in the top that says http://pastebin.com/
27. copy that text
28. go to this thread
29. make a new post and paste that URL

not quite sure exactly why that was needed, but there's the step by step instructions to walk you through it