Blockland Forums > Help

Are My Servers Always Going To Be Dead With This port forward info?

Pages: << < (5/5)

dumdum566:


--- Quote from: Annoying Orangeetfan on August 01, 2009, 09:20:43 PM ---I wish I knew how I did it before.

--- End quote ---
we share port forwarding lives =P
I never port fwd for v9, i hosted. I port fwd for v10+ just never worked again..

General Nick:


--- Quote from: Enterprise on August 02, 2009, 12:02:49 AM --- Modem Router. You only ported the router. Which is useless without a modem.Theres 2 doors of security. Your router was told by you. Port 32000-32800 Are OK to pass. But the modem that connects you to the internet Still has no clearence. The router doesnt connet to the Internet. It connects to the modem . The router connects to devices on a LAN connection. The modem connects to the IP. Giving you internet acess.

--- End quote ---
Do you even know what the hell you're talking about?

You don't need to forward a modem. I've never even heard of such a step.
I have a router-modem in one. All I had to do was forward the router and it works.

Please don't help if you don't know what you're talking about.

zenloth:

Enterprise, a few quick googles and I found that your "modem" is a router-modem.
It is physically impossible to port forward on a straight modem (unless using a dial up connection where extremely little work is required). A normal modem contains no kind of firewall equivilent.

--- Quote from: Gen. Nick on August 02, 2009, 06:32:17 AM ---Please don't help if you don't know what you're talking about.

--- End quote ---

Annoying Orangeet I would suggest following Wedges link if you are sure you have port forwarded correctly, it is a very good guide.

Korabar:


--- Quote from: zenloth on August 02, 2009, 09:08:31 AM ---Annoying Orangeet I would suggest following Wedges link if you are sure you have port forwarded correctly, it is a very good guide.

--- End quote ---
Alright, I'll try it.

Korabar:

There's something I never understood though.  what to put as my static IP adress. My Ip is 192.168.0.3, and I put my static as 192.168.0.30.  Is that a good way to put the static ip as?

Pages: << < (5/5)

Go to full version