Blockland Forums > Help
One hit with the hammer destroyes my whole build!
KoopaScooper:
--- Quote from: Butler on November 18, 2009, 04:29:44 PM ---Read...
--- End quote ---
That didn't answer anything.
YOU learn to read.
--- Quote from: Kalphiter on November 18, 2009, 04:06:23 PM ---Your build may be floating
--- End quote ---
This is the problem.
Butler:
--- Quote from: Butler on November 18, 2009, 04:29:44 PM ---read...
--- Quote ---V12 Solution: The real problem here is that in v11 you need to use the wand all the time because the hammer can't make holes in walls. In v12, the hammer can now destroy any brick that won't cause a chain reaction. That means you can go nuts with the hammer and rest easy that you will only break one brick at a time. The hammer now meets all of your normal building needs and the wand is only used for clearing large numbers of bricks.
--- End quote ---
--- End quote ---
You learn to read genius[/sarcasm]
KoopaScooper:
--- Quote from: Butler on November 18, 2009, 05:57:16 PM ---
You learn to read genius[/sarcasm]
--- End quote ---
But. If the brick is floating witn another brick, even if you hit a brick that doesn't support anything, it colapses.
God you're an idiot.
Niliscro:
--- Quote from: Butler on November 18, 2009, 05:57:16 PM ---
You learn to read genius[/sarcasm]
--- End quote ---
What happened in the case of our OP's issue is a chain reaction caused by the hammer.
Note the words chain and reaction.
Butler:
--- Quote from: KoopaScooper on November 18, 2009, 06:28:34 PM ---But. If the brick is floating witn another brick, even if you hit a brick that doesn't support anything, it colapses.
God you're an idiot.
--- End quote ---
Ok, that would happen, but it's ONE brick...
He's talking about hammering on one brick and destroying his entire build