| Blockland Forums > Help |
| DI-524 Portforwarding help. |
| (1/2) > >> |
| mac338:
Hello there. I have a D-Link router of the model: "DI-524". I have followed the official portforward instructions, but my server still turns out "Dead". Then I tried the one on http://portforward.com/english/routers/port_forwarding/Dlink/DI-524/Blockland.htm Where it said I had to open a lot of ports, but as it turns out. I cant open all those port's with my router interface. I have portforwarded this router before, but I had to reset it, do i know it can be done. But if anyone could come up with a solution I would be glad. |
| Devvy:
I agree with mac, I used teamviewer and tried to forward his server, with no success :S |
| zenloth:
Make sure you are forwarding for the correct internal IP for port 28000, make sure you use the "save" or "save and reset/restart" option. Also check that your firewall is not blocking incoming/outgoing connections, I suggest setting up an exception. |
| mac338:
I have just made a few changes, but now when I run "Dedicated" an error apeers saying: "Authentication failed: DNS error." I checked my CMD and it said my DNS adresses where 192.168.1.1 and 192.168.0.1. Im pretty sure my server will work, once I fix this error. |
| mac338:
Oh by the way. My DNS servers are the same as my default gateway:S |
| Navigation |
| Message Index |
| Next page |