| Blockland Forums > Help |
| Brick shooter |
| (1/1) |
| FreeBird:
Ok im trying to make a little building and when you press a button lots of bricks constantly fly out with phisics and just start landing every were. Help please |
| sir dooble:
I'm sorry, how do you mean? What sort of button? Do you have a weapon equiped? Or have you messed up some events? You're going to have to be slightly more specific. |
| Lugnut:
--- Quote from: FreeBird on December 14, 2009, 04:41:45 PM ---OK, I'm making pile of bricks that I want to fly everywhere. Help? --- End quote --- Fixed. i think. |
| Deathwishez:
I've done this. You need to make a stack on bricks. Use four 1x1F's in front, then one 2x4F, and a 1x4F behind the 1x1F's and on top of the 2x4F. Do that about six times. Then on the 1x1F's, add this event: --- Code: ---[X] 0 [0] onRelay > Self > fakeKillBrick > (See Below) --- End code --- The X and Y may need to be changed depending on how you build this, the Z should be zero, and the time can be anything above 3. Below that just looks bad. Okay, now on the bottom 2x4F, name the brick Brick_Emitter_Start Add this event to all non-1x1F's: --- Code: ---[X] 0 [50] onRelay > Self > fireRelayUp --- End code --- On the brick you want to use to trigger the brick emitter, use this event: --- Code: ---[X] 0 [0] onInput* > <NAMED BRICK> [Brick_Emitter_Start] > fireRelay --- End code --- *For the onInput, any input may be used. |
| Deathwishez:
Here's a horrible picture. = - 2x4F + - 1x1F # - 1x4F Front: ==== ++++ ==== ++++ ==== ++++ ==== ++++ ==== ++++ ==== Top: ==== ==== Side: == #+ == #+ == #+ == #+ == #+ == |
| Navigation |
| Message Index |