| Blockland Forums > Suggestions & Requests |
| Build Print Bricks |
| (1/2) > >> |
| Demian:
I'd say they're quite simple to make, but I couldn't do it myself. A normal print brick that you can build on. Names would go as following: 1x1F Build Print, 1x2F Build Print and 2x2F Build Print. No need for special icons, the default ones are good. (base/client/ui/brickIcons) Major extra cookies if someone makes Ceilings Print Bricks buildable. Trust me, this makes your life much easier. I found an old topic about this from 2008, people weren't too fancy about the idea. New try. |
| ChexGuy331:
Why wouldn't they like this? You could have the entire floor tiled in a build that way. |
| Niliscro:
--- Quote from: ChexGuy331 on January 31, 2010, 12:32:03 PM ---Why wouldn't they like this? You could have the entire floor tiled in a build that way. --- End quote --- You can do that anyway, but it's a pain in the ass. |
| Tophius:
This would be so easy to accomplish that I doubt it'd even be worth releasing. Right at the beginning of each flat print brick you should see something like this: --- Code: ---2 2 1 SPECIAL dd dd --- End code --- Just replace each d with a b and you're pretty much set. (After packaging, of course) |
| Demian:
--- Quote from: Tophius on January 31, 2010, 12:53:35 PM ---This would be so easy to accomplish that I doubt it'd even be worth releasing. Right at the beginning of each flat print brick you should see something like this: --- Code: ---2 2 1 SPECIAL dd dd --- End code --- Just replace each d with a b and you're pretty much set. (After packaging, of course) --- End quote --- Guess what, that didn't work. That's the first thing I tried. |
| Navigation |
| Message Index |
| Next page |