Blockland Forums > Help
Print Bricks
Butler:
Thats not for PRINT BRICKS
Zenthrox:
Go down and read the "TEX" section. It's mentioned there.
You should be able to figure out the rest from that. If not, I think you'll be able to get something useful out of it.
Butler:
--- Quote from: Space Guy on December 20, 2008, 04:18:42 AM ---...TEX:
2x2ramp.blb
--- Code: ---TEX:TOP
--- End code ---
This defines the texture that the particular quad has.
TOP = Brick studs
BOTTOMLOOP = Brick underside texture
BOTTOMEDGE = Brick underside edge texture
SIDE = Brick side texture with shading on each edge
RAMP = Rough 'ramp' surface
PRINT = Print texture, when the brick is 'printed'. Extra fields in the datablock will probably need to be added to let the print brick function.
--- End quote ---
He doesn't explain...
MtnDew:
Press B to open the brick menu, and place a brick with the grid looking decal on the top.
Then use the printer tool to place a print on it.
:cookieMonster:
Syntho:
If you can't figure this out yourself, you will never be able to do it.