Does a print have to be 512?

[Robin Ihoodl]

Just a question. I really need high-quality prints because i have a HUGE Brick, But i was wondering if i could make them bigger.

[Ad Bot]

[Doomonkey]

I think it can be any power of 2, but I am not sure.

[Sauce]

512pixels just makes the image look better because the brick stretches the image .. but 256x256 should be fine .. and icons should be 64x64 no exceptions

[Robin Ihoodl]

512pixels just makes the image look better because the brick stretches the image .. but 256x256 should be fine .. and icons should be 64x64 no exceptions

I was needing it to be bigger. alot. Bigger.

[pecon98]

I think it can be any power of 2, but I am not sure.

Therefore you could use 1024 or 2048 or 4096 (and so on).

[SPooK]

I was needing it to be bigger. alot. Bigger.

I see what your doing here :3

[Sauce]

I was needing it to be bigger. alot. Bigger.

512 would be perfectly fine for any image .. i use 256x256 for my prints and it works fine . .so really no need to make a huge image file that will just look microscopic on a print brick.

[zenloth]

i have a HUGE Brick

I'd assume this is the reason he'd want high quality prints; and as has been said before any power of 2 will work.   

Question has been answered, unless any follow-ups, please lock.

[Sauce]

HUGE Brick

512 would be plenty size for even a 64x64 print brick ..

[Robin Ihoodl]

The quality is too low when it goes on it though, It's all pixelated nearly

[Sauce]

Then that would mean the original Print is pixalated, that has nothign to do with the size

[soba]

512x512, 256x256, 128x128, 256x128 etc, as long as its of 512 - 256 or 128

NOTHING else will work, believe me, I tried

[phydeoux]

512x512, 256x256, 128x128, 256x128 etc, as long as its of 512 - 256 or 128

NOTHING else will work, believe me, I tried

prints larger than 512 can be used. Example, my drive-in video uses prints that are 1024x512. So a 1024x1024 should still work, and even a 2048x2048 could potentially work.
(but the prints were in a folder named "print_1x16" meaning it doesnt show up on 1x1 and 2x2 print bricks, only the special movie wall brick i made uses them)

and robin, make sure the prints also have an icon folder with every print being exactly 64x64, or else the print wont show up for use.