Author Topic: Comrads tau v2.0: the wrath of sa'cea  (Read 4676 times)

i will forget YOUR DAEMSONS up
what if i forget you up?
;D

Ask Tingalz how easy that is to accomplish


Ask Tingalz how easy that is to accomplish
Kill the pathfinders first.
Bring lots of anti-tank and ap2 to use against his hammerheads and broadsides.
Have some good anti-infantry such as heavy bolters to use against his fire warrior blobs.
Do not put all of your vehicles in the same spot. Better yet, don't bring any vehicles and laugh as his railguns become near useless.
And for forgets sake, try to get the initiative.


Leme recommend an x-acto knife set (which are like $5 at Wal-Mart), and one of these.




Plus some 4000 grit sanding paper for those sprue cut that aren't flush with the rest of the plastic. If you do it well, you won't have to deal with flashing or mold lines.
« Last Edit: May 28, 2012, 11:17:57 PM by Ronin »

Leme recommend an x-acto knife set (which are like $5 at Wal-Mart), and one of these.


Plus some 4000 grit sanding paper for those sprue cut that aren't flush with the rest of the plastic. If you do it well, you won't have to deal with flashing or mold lines.
i have an x-acto knife, and one of the cutting boards. I dont use it that often tho lol

i will go pick up the sanding paper, thanks for the recommendation

laugh as his railguns become near useless
hi im a tau and i gulp down a barrel of richards every day
i also bring submunitions and cry into my pillow about how up i am

i have an x-acto knife, and one of the cutting boards. I dont use it that often tho lol

i will go pick up the sanding paper, thanks for the recommendation
Np.

The set has a bunch of different blade shapes and sizes and some spares when they get dull, it may seem redundant but its plenty worth it.

GW Primers are good too, especially if you have tiny metal bits (which usually should get a rinse under detergent & water). I always used black gesso but that's a different ballgame.

i might become a commander...

if i had money ;(