Author Topic: Low FPS on badspots block party  (Read 3298 times)

here's a easier way for checking CPU temperatures
http://www.alcpu.com/CoreTemp/

here's a easier way for checking CPU temperatures
http://www.alcpu.com/CoreTemp/

Don't get that.

Get Speedfan instead because it can also supply GPU temp.

Don't get that.

Get Speedfan instead because it can also supply GPU temp.

I've used Core Temp and I like it, haven't tried Speedfan yet though. I would say not to go by BIOS temp. reading because I heard its not as accurate for some reason. The program I would notice my temps would be like 27 degrees c on idle an then in the bios it would say 34 degrees C.

My asus mobo came with AI suite which has all this nice stuff like fan control and temperature readings yall jelly

Is this bad?

Guess it doesn't matter now that badspots block party is down

it's not bad but could be better, it wouldn't affect your performance though.

I reember Badspot saying that he added something that allows him to see what hardware we have and how it performs on blockland. Maybe he could tell me whats making my stuff perform less then altiris

Is this bad?
Is that your CPU on idle? On idle it should be around 30 degrees C, 45 is kind of high for idle. Run Blockland with max shaders and the Block party map and then quickly switch to core temp and post ur CPU temps. They shouldn't be above 60 or so.

Is that your CPU on idle? On idle it should be around 30 degrees C, 45 is kind of high for idle. Run Blockland with max shaders and the Block party map and then quickly switch to core temp and post ur CPU temps. They shouldn't be above 60 or so.

ok

It might be your internet.

It might be your internet.

No. I saved the map and loaded it in singleplayer. Exact same framerate

I'm also getting strangely low fps.
I'm 100% sure a gtx 690 can do better than 50 fps with max shaders.

I'm also getting strangely low fps.
I'm 100% sure a gtx 690 can do better than 50 fps with max shaders.
I had areund 150 fps on my old gtx 590, why does a better card get only 1/3 D:

We should ask badspot about this. Have you tried putting your 590 back in and seeing if theirs a difference?