Author Topic: "Server could not verify your Blockland ID"  (Read 6118 times)

Is your IP dynamic or static?
Sorry about that, I was quickly replying on this.

Here's how you can tell if it's dynamic or static: https://help.screenconnect.com/Determine_if_you_have_a_static_or_dynamic_IP_address

Sorry about that, I was quickly replying on this.

Here's how you can tell if it's dynamic or static: https://help.screenconnect.com/Determine_if_you_have_a_static_or_dynamic_IP_address
Sorry for late reply, it's static I restarted the router and the IP is the same.

Sorry for late reply, it's static I restarted the router and the IP is the same.
This could be by chance.
If there are not a lot of devices connected to the router it is more likely to get the same IP.
Anyhow, from what Filipe has told me, he has a dynamic internal IP.
Other information i can provide without risk:
Filipe's DNS seemed to have some trouble, since Filipe talked about errors with DNS in it.
We already put the google DNS server as preferred DNS server now, so that is ruled out.
Filipe can ping master.blockland.us without any packet loss.

This is a strange problem.

No edit? Did not know this was not possible in help section.
Anyhow, Status update, Filipe can also visit http://auth.blockland.us/ without problems.

No edit? Did not know this was not possible in help section.
Anyhow, Status update, Filipe can also visit http://auth.blockland.us/ without problems.
Yes I can confirm I see auth.blockland.us just fine in there.


Are you using a proxy
To be honest with you I'm not really sure how can I figure that out?


Ok so I used my non-steam version of Blockland and checked it's cmd, it showed up this.
%
Binding server port to default IP
UDP initialized on port 11589
Starting client authentication...
Engine initialized...
WARNING: authTCPobj_Client - got non-200 http response "403"
WARNING: 4xx error on authTCPobj_Client, retrying
%

Not sure if that is anything useful or not.

Ok so I used my non-steam version of Blockland and checked it's cmd, it showed up this.
%
Binding server port to default IP
UDP initialized on port 11589
Starting client authentication...
Engine initialized...
WARNING: authTCPobj_Client - got non-200 http response "403"
WARNING: 4xx error on authTCPobj_Client, retrying
%

Not sure if that is anything useful or not.
that's very unusual. Try it on a fresh install.

that's very unusual. Try it on a fresh install.
I just did and the same thing happens.

403 error means forbidden, which means auth.blockland.us is blocked

403 error means forbidden, which means auth.blockland.us is blocked
This is so weird, why it would be blockedm

When was the last time you played BL prior to this issue?

Is there something wrong with your firewall? Did you do any updates or tweaks regarding it?

Did you have to mess with the router? (I think you said something about this but I missed it).

Did you switch internet providers?

Has the settings for your internet mysteriously changed?

Oh! Do you have Avast or any other similar computer safety system? That could be messing with your game. I got to a store (it's called "The Viper Store") and sometimes my FireFox gets iffy about the safety of the site. (Even though Viper enthusiasts have used it before).


Also, I would have just added this in to what I said before but you can't edit the previous post....