Wheel Alignment Problems

[Blastdown]

I'm sure this has been spoken about before, but I was unable to find anything that helped me. So now I turn to whoever out there knows and is willing to help me out.

What I do know is that all joints are correctly named and both the vehicle and tire models are in the right directions.
What I don't know is how to get the tire exactly where the joints are.
I have not assigned anything to any joints, if that is suppose to be done.
Fixed.

Also all the tires are spinning like train wheels, and all tires turn in the direction I want to turn (being left or right). I am unsure why it does this, and would like to know how to fix it. The vehicle uses the Jeep script, in case it requires script work.
Fixed.

Cheers, and thanks for any help.

[Ad Bot]

[heedicalking]

Center the wheel on the XYZ axis. This happens to me, this may be a fix.

[Blastdown]

Does not appear to be working/doing anything.

Is this centered correctly?

[Muffinmix]

Make sure the whell hubs are OUTSIDE the collision box

[Packer]

Centre the Wheelchair itself on the axis, its off to a side meaning it'll do what its doing.

[Blastdown]

Make sure the whell hubs are OUTSIDE the collision box

Centre the Wheelchair itself on the axis, its off to a side meaning it'll do what its doing.

Thanks, it worked.

Now for some model and script changes, a few test servers, and it will be finished. =D

Cheers all.

[Muffinmix]

Thanks, it worked.

Now for some model and script changes, a few test servers, and it will be finished. =D

Cheers all.

Great model by the way, good luck!