One hit with the hammer destroyes my whole build!

[Barakuda]

As all of you  know, hammer can destroy only a brick, wich wouldnt destroy another brick.

So, i load my WIP save and build it... Then i wanna delete one brick. I take the hammer and whan i hit the brick, the whole thing crashes! But, if i go in a vehicle meanwhile the build is destroying, teh vehicle wont dissapear!

If i type /reload bricks, Afghanistan loads. (wich i havent used for years)

Can somebody please tell me what's going on? Thx :D

[Ad Bot]

[Zenthrox]

O_O

Uhhh... did you happen to catch Missingno. recently?

*lolpokemonrefrence*

[Kalphiter]

Your build may be floating

[Olaf]

I agree with Kalpiter i think you made it on an Old Slate? and the New is lower?

[Butler]

Read...

V12 Solution:  The real problem here is that in v11 you need to use the wand all the time because the hammer can't make holes in walls.  In v12, the hammer can now destroy any brick that won't cause a chain reaction.  That means you can go nuts with the hammer and rest easy that you will only break one brick at a time.  The hammer now meets all of your normal building needs and the wand is only used for clearing large numbers of bricks.

[KoopaScooper]

Read...

That didn't answer anything.
YOU learn to read.

Your build may be floating

This is the problem.

[Butler]

read...

V12 Solution:  The real problem here is that in v11 you need to use the wand all the time because the hammer can't make holes in walls.  In v12, the hammer can now destroy any brick that won't cause a chain reaction.  That means you can go nuts with the hammer and rest easy that you will only break one brick at a time.  The hammer now meets all of your normal building needs and the wand is only used for clearing large numbers of bricks.

You learn to read genius[/sarcasm]

[KoopaScooper]

You learn to read genius[/sarcasm]

But. If the brick is floating witn another brick, even if you hit a brick that doesn't support anything, it colapses.
God you're an idiot.

[Niliscro]

You learn to read genius[/sarcasm]

What happened in the case of our OP's issue is a chain reaction caused by the hammer.
Note the words chain and reaction.

[Butler]

But. If the brick is floating witn another brick, even if you hit a brick that doesn't support anything, it colapses.
God you're an idiot.

Ok, that would happen, but it's ONE brick...
He's talking about hammering on one brick and destroying his entire build

[dawngaward0110]

Is it a floating build? If you hammer a brick of a floating build, the whole thing gets destroyed.

[Whatisthis]

O_O

Uhhh... did you happen to catch Missingno. recently?

*lolpokemonrefrence*

I seriously lol'd on the inside. 

[KoopaScooper]

Try duplicating it to the ground and see if that works.

[Barakuda]

The build is supposed to be a Star Wars dogfight. I made it in Ladioses slate astro.

And it is floating. So im just DLing buildaspacestation :c

[Space Guy]

If the slate floor is below your build, connect all the baseplates together with large 64x ones then attach a tower of 2x2x5s/other bricks going down to the bottom until it's on level ground. Then use the Wrench to make them all invisible/non-rendering/non-colliding.

If the slate floor is above your build, use the Duplicator to move it.