Author Topic: Escape the box -Animated!-  (Read 3371 times)

Help the stick guy escape the box by telling him what to do. When you suggest something I'll upload a gif of him doing that action.



In the box:

-Hanging lamp

-Door

-Ledge (with spikes)

-Box (Heavy)

-Tool kit

-Light

-Dripping water




How do you drown from that?

Open the tool kit and empty it. Then put the empty tool kit under the dripping water so it begins to fill.

Move the box over far enough so you can reach the ledge, and examine the hole in which the water comes from.

Wait a few hours until the water fills the room. You will then escape in one of two ways:

1) The pressure from that much water fractures the weakest point in the wall, id est, the crack, causing that part of the wall to crumble outward so you can swim and/or climb through the resulting hole and escape.

or

2) You drown and thus die.
« Last Edit: December 27, 2009, 06:47:08 AM by RMS Gigantic »

Quote
Not another one of these...
Yea, these are being done alot lately, but you shouldn't really hold anything against them unless they're bad.

A tip though, don't use stickmen. challenge yourself and maybe try a Castle-like stickman. (No, not building castle, animation Castle.)

Tip#2: Escape the room Cp's are overused and boring.
Tip#3: All black and white things aren't fun unless they're like monochromation colours and stuff.

Oh yea, this situation is inescapable, so just board on a different dimensional plane and FWOOSH, ahem, walk out of there.

Drink the dripping water.

Wait a few hours until the water fills the room

The water seems to be flowing down a drain:


Open the tool kit and empty it. Then put the empty tool kit under the dripping water so it begins to fill.
The tool kit is already empty. The stick person puts it under the water:


Move the box over far enough so you can reach the ledge, and examine the hole in which the water comes from.

The box won't budge:



Then the tip of your arm.


Stare at the water for a long time until you go insane. Seriously, it works.

Hmm...

Empty out the tool kit and begin to disassemble it. There should be a half inch thick rod that is between the kit and lid of it. Attempt to remove it, then use it to bend open the sewer grate.

If it bends open, slide down it.
« Last Edit: December 29, 2009, 05:16:24 AM by MackTheHunter »

If it bends open, slide down it.

It's too small. However, the stick guy now has a bent metal rod: