These are all separate add-ons, I felt that they all should go in the same topic as they're all bricks and I have quite a few of them.
1x1F Round Print Brick v3This add-on dates all the way back to 2011, on RTB. It was "suggested" even earlier in 2009. If I recall correctly, I was still known as ChristopherP. According to the RTB archives I found, the last version was version two, last updated in 2013. After three years, I now present to you the third version of this very simple add-on. All I did was polish it a bit, and remade the icon. Enjoy.
Author: piber20
Play around with it, I'm sure you can find some uses.
LinksDownload Brick_1x1FRoundPrint.zip v3If you cannot access my website for whatever reason, please check the mirrors below:
View on Blockland NexusView on Blockland Glass
1x1 Rounds Full v2Introduces 'full' versions of 3 1x1 rounds which have smooth sides and no indents - similar to the 2x2 rounds.
Author: piber20
(side textures are a little off)
The first image is a comparison between the normal rounds and the full rounds. The second one is a desk made using the full rounds.
LinksDownload Brick_1x1RoundsFull.zip v2If you cannot access my website for whatever reason, please check the mirrors below:
View on Blockland NexusView on Blockland Glass
Baseplate Print Bricks v2Baseplate print bricks probably already exist, but I decided to make my own anyway. Each baseplate has their own print type, so you're going to want to make/find prints prefixed with 32x32f, 16x32f, and 16x16f.
At the moment they do not have any icons. They work pretty much flawlessly though.
Author: piber20
LinksCheck out my Road Prints, they are made specifically for these bricks.Download Brick_BaseplatePrintBricks.zi p v2If you cannot access my website for whatever reason, please check the mirrors below:
View on Blockland Nexus
L Shaped Bricks v7First made in 2010 and released on RTB, latest version was released in 2011 at v4. Here's v5, with more polish and remade icons.
Contains 5 bricks based off of the 2x2 Corner brick that was introduced in v15(?). A plate version, tall versions, and print versions. The print bricks have their own print type, so you're going to want to make/find prints prefixed with 2x2L and 2x2fL.
Author: piber20
King Tinks fixed the side textures of the taller bricks years ago. Don't know if he still exists under that name.
(flats' side textures are a little off)
LinksCheck out my More Default Prints, it contains default styled prints that work for these bricks.Download Brick_LShaped.zip v7If you cannot access my website for whatever reason, please check the mirrors below:
View on Blockland NexusView on Blockland Glass
Feel free to suggest changes and provide your constructive criticism. Don't make it nasty.