Author Topic: What should i reduce the print size to?  (Read 1046 times)

can. done it months ago but i've forgot the program i used to do this and i'm using a different brick


OKAY!!!!!!!!!1on1e!!!

I've made the print, Put it ingame but i noticed the brick i made has NO Prints, Just the letters, Would i have to name the file Print_64x33_text?

Print_1x1f_64x33
Print_2x2f_64x33
Print_1x1_64x33


The icons 64x64 and the prints should be 512x512 no matter what print brick it's for.
Wrong.


Well that's how it is with most prints -_-
The one I posted is a default print. One of the 1x2s.

You were right about icons always being 64x64, but not about prints being 512x512.

The one I posted is a default print. One of the 1x2s.

You were right about icons always being 64x64, but not about prints being 512x512.

I don't even know what a 64x33 would fit for.

Or if it's 64 in width and 33 in height, or what.

Print_1x1f_64x33
Print_2x2f_64x33
Print_1x1_64x33



Alright, I'll go try this now.

I don't even know what a 64x33 would fit for.

Or if it's 64 in width and 33 in height, or what.
I'm going to assume 64 in width and 33 in height.
Which in torque units, would be 32x0.5x19.8
So I would suggest using 4096x2534 (2534.4) or similar ratio. Like 1024x634 (633.6)

I'm going to assume 64 in width and 33 in height.
Which in torque units, would be 32x0.5x19.8
So I would suggest using 4096x2534 (2534.4) or similar ratio. Like 1024x634 (633.6)

Do you know what i should name the .zip?

Do you know what i should name the .zip?

If you want it a print, regardless of what size you want it, it must be starting with

Print_1x1f_...
Print_2x2f_...
Print_1x1_...

And I said it once again, what's that hard to do dammit?

Alternatively, if your print is more rectangular;

Print_1x2f...

Otherwise, the other type of print availible is

Print_2x2r... for ramps.


Ok, I've tried that but nothing is showing up in the prints section of the brick, Do you have IRC or something so i could speak faster to you?

Ok, I've tried that but nothing is showing up in the prints section of the brick, Do you have IRC or something so i could speak faster to you?

ID 17969, add me on RTB.

THANK YOU LEETZERO.

Locked.