Author Topic: akio attempts to upgrade his PC: resolution part 3 of 3 rip monitor..  (Read 3367 times)

what "thing under the card"

put a circle around it in one of your previous pics

what "thing under the card"

put a circle around it in one of your previous pics
I can't because I'm on my phone. It's under the card in the first pic. Black with a rough and wavy plastic bottom

oh my god did you seriously take the heatsink off the card

please tell me you didnt just do that and try to boot it

oh my god did you seriously take the heatsink off the card

please tell me you didnt just do that and try to boot it
Well..

lol just plug the monitor into the motherboard and fudge the old card. its nothing to care about anyways.

you can still do this

if you dont understand the importance of the heatsink on the card i would seriously suggest you take the computer to a store for help before you do more damage than you might have already done

This is what it looks like:


There's also one black thing unplugged on the bottom, which I'm not sure if it should be.
Can't I just not use the nvidia card and use the other PC cards?

holy stuff you have it upside down on the floor?

hell yeah dude.

it literally just looks like just a piece of metal. if I screw it back on can I run my comp?

no.

you need to re-apply thermal paste for contact between the gpu and the heatsink

seriously just please take it to the store

Yeah Akio, you should seriously take it to the store to get the heatsink re-applied

Really? It came off so extremely easily. It took 3/4 screws out before it was dangling. There would be no possible way for me to remove the GPU if this thing didn't come off the bottom.

I will take this to a store tomorrow morning

There would be no possible way for me to remove the GPU if this thing didn't come off the bottom.

looks like it would come out just fine to me it has plenty of clearance

looks like it would come out just fine to me it has plenty of clearance
The GPU was screwed onto it and holding it up

The GPU was screwed onto it and holding it up

and?

the gpu can stay screwed into it and come out just fine with it

its part of the graphics card