Author Topic: Server Problems  (Read 4287 times)



28000 after I changed it
According to your port forward image it says 28100 at the end, change that to 28000

bump again
bump.
Stop being so impatient, makes me want to pretend to not see this topic when people demand help like this

According to your port forward image it says 28100 at the end, change that to 28000

I said I already changed it in prefs.cs.

I said I already changed it in prefs.cs.
You said the port is 28000, the image says 28100. Ports do not match.

That was before I changed it.

That was before I changed it.
You aren't understanding, make sure the 28100 port is the same as the game too.

Follow this guide it is better:
https://portforward.com/router.htm

Make sure to disable UPnP everywhere. Blockland and your router.

Also give your computer a static IP.
https://www.howtogeek.com/howto/19249/how-to-assign-a-static-ip-address-in-xp-vista-or-windows-7/

You aren't understanding, make sure the 28100 port is the same as the game too.

No, you aren't. Sorry, but I didn't post it because I can't get the new port to show in the console, but I changed the port to 28000 after I was suggested to do so.

I posted in another thread due to the fact a lot of people are complaining at once, it might be at the fault of the master servers. I'd try and ask badspot himself if he can restart the Master Server since this is happening.

I posted in another thread due to the fact a lot of people are complaining at once, it might be at the fault of the master servers. I'd try and ask badspot himself if he can restart the Master Server since this is happening.

No wonder why other programs work sometimes and some people can join! I think you just solved my problem.

No wonder why other programs work sometimes and some people can join! I think you just solved my problem.
is this sarcasm cause the master server list is fine - if it wasnt, nobody could join any server, not just yours

is this sarcasm cause the master server list is fine - if it wasnt, nobody could join any server, not just yours
It's not.

No, you aren't. Sorry, but I didn't post it because I can't get the new port to show in the console, but I changed the port to 28000 after I was suggested to do so.
And I told you that the image from the router has a different port (28100). You should read. "Cant show new port" yes you can use the same console command - do I seriously need to spell it out on what you are doing wrong in images? I am explaining where it is, shouldnt be hard

Also port forwarding has 0 effect from the master server, only UPnP does.

have you tried port forwarding both 28000 and 28100?

it sounds like you tried to change BLs port, but are unable to check which it actually is, so BL may be trying to use 28000 or 28100 but you won't tell us which