Author Topic: Upside down cone brick (Read 2030 times)

Poopiemonster · February 03, 2009, 07:07:41 PM

You should do it

You mean WRB?
Then do it, WRB.

Ad Bot · Advertisement

WRB852 · February 03, 2009, 10:55:33 PM

Gah, I've never even made a "special" brick before. I suppose I could try, but I would most likely fail.

Plateau · February 03, 2009, 11:00:17 PM

do it it would be very useful

General Nick · February 03, 2009, 11:00:30 PM

I don't get it. Which cone?

2x2x2 or 1x1x1?

Plateau · February 03, 2009, 11:01:12 PM

The small one in

sir dooble · February 04, 2009, 07:39:43 AM

I don't get it. Which cone?

2x2x2 or 1x1x1?

1x1x1, upside down, as in an ice-cream cone

Crazy Salt · February 06, 2009, 06:05:03 PM

I don't get it. Which cone?

2x2x2 or 1x1x1?

Both would be nice.

Menen · February 06, 2009, 06:25:21 PM

I can model, but I can't code....yet....

No modeling required, just take the cone model, flip it upside down, change the botom textures.

Matt Freeman · February 08, 2009, 05:01:33 PM

Yeah this is a must. Same with the 3x1 round too.