Author Topic: Dsi Question.  (Read 2058 times)

Ok so when i try to connect to an access point I can see it and it have 3 full bars, but when i start connecting the bars on the top screen right bottom corner turn red and i cant get the signal back.

P.S. The access point is from my house.

smash with hammer, worked with mine.

Too risky, it might break D:
Kira, ask

Page-stretching Nintendo-style! :D
« Last Edit: July 12, 2009, 02:33:07 PM by TheLegomaster »

I've read that DSes can only connect to certain frequencies. Not sure on that.

Too risky, it might break D:
Kira, ask
-snip-
Page-stretching Nintendo-style! :D
Mine didn't get stretched :o!


It takes some huge stuff to stretch this mother forgeter.  :cookieMonster:

(My new laptop has a giant screen)

i had this problem too. have you tried to port foward. you may have messed ur tcip ports, you dont need to change these options. go into network connections.nunder he connection u are using double click it.double click tcip options. pressauto obtain ip  and dns, you dont need this step when fowarding. thanks irc titanic for more dsi questions.


Ok so when i try to connect to an access point I can see it and it have 3 full bars, but when i start connecting the bars on the top screen right bottom corner turn red and i cant get the signal back.

P.S. The access point is from my house.
Turn the router off, then back on again.

I do this when my router fails to Act. (I.e; Not respond to the interwebz)





is that one of them flying cars