Blockland - Hosting HELP

[Liek Dat]

Please help me i have port forwarded 123213213 times... Look

http://www.youtube.com/watch?v=Cn7d6507jbk

Help me and you get a   

[Ad Bot]

[Aware14]

it will be dead iuf you try 2 join your own server duh you have 2 stay on and be patiant
if you want 2 be able 2 leav and join you have 2 go 2 your BL folder and select Dedicated.bat (YOU MUST KEEP THIS PROGRAM RUNING)
then you can go on and join it if it is ported.

have fun!

[Liek Dat]

I tryed that still DEAD.

[Liek Dat]

13 veiws 1 comment... Leave a comment on the video or on the topic.

[Liek Dat]

BUMP

[Badspot]

Did you actually set your computer to use the IP address 192.168.1.47 or did you just pull that number out of your ass?

[Cody574]

I've tried setting my IP address like it says too, but it keeps saying that the IP address and the default gateway are not on the same network and it cuts off my Internet connection until I set it back to normal.

[Liek Dat]

Yes i did. and i HAVE port forwarded correctly.

[AGlass0fMilk]

Go to your search bar, type in Command.

Click on Command prompt and a black box should pop up. Type into the box "ipconfig /all"

And a whole bunch of your IP configurations should pop up. Look near the top, and find IPv4, and write down the numbers under it, and then look under the IPv4 and there should be:

Code: [Select]

SubNet Mask
Default Gateway
DNS servers
Write down all the numbers across from that.

And I hope to jesus that you are on a Vista OS. Go to the start bar, in your bottom left-hand corner, and click on control panel. Go to the search bar, and type in "ip" and wait. Then click on "view network connections" and right click the internet connection you are using (whether it's wireless LAN or a wired connection, it should have bars and not a red 'X') and then click properties. Then it should ask you for permission, click allow (or yes) and click on "Internet Protocol Version 4 (TCP /IPv4)" and then click properties. Fill in the information here with the corresponding numbers that you wrote down from the command prompt.

I'm not sure if that is necessary anymore, but it is for me as my server is dead without it.

[AGlass0fMilk]

Oh and when you are filling in the information, click

"Use the following IP adress"

and

"Use the following DNS server addresses"

[Jsk2003]

I think that's a router I had, I had a linksys router in the past.

Look for something about "Block WAN Request" I remember I had to disable that for me to be able to host on bl with that router.

[Jsk2003]

Wtf forget me, I forgot to look at dates, but it wasn't solved anyway, so oh well.

[MagicAhrim]

If you are connected using a wired router most likely provided by your internet provider and a wireless router than you will have to set the router provided by your internet provider and set it into bridge mode. If you do not know how to do this call your internet provider for help. If you are still having trouble you can PM me and if you would like some help from me I may have a solution.

[General Nick]

If you are connected using a wired router most likely provided by your internet provider and a wireless router than you will have to set the router provided by your internet provider and set it into bridge mode. If you do not know how to do this call your internet provider for help. If you are still having trouble you can PM me and if you would like some help from me I may have a solution.

That had absolutely nothing to do with the problem.

Did you even set up a static IP, default gateway and DNS?

[Clone v117]

it will be dead iuf you try 2 join your own server duh you have 2 stay on and be patiant
if you want 2 be able 2 leav and join you have 2 go 2 your BL folder and select Dedicated.bat (YOU MUST KEEP THIS PROGRAM RUNING)
then you can go on and join it if it is ported.

have fun!

i tried this but it comes up saying i have to type
setupRTBdedicated("your username",1);
ive tried typing this every possible way but it never works it says error plz help