Author Topic: I port forwarded but my server is always dead? (Read 867 times)

Good_patch · August 18, 2009, 09:55:02 PM

Nobody joins and my friend says its dead? please help me solve this problem. I run on Windows XP.

Ad Bot · Advertisement

Good_patch · August 18, 2009, 10:06:54 PM

Reply please

Block Builder · August 18, 2009, 10:08:57 PM

Are you actually using the IP address you put into there? If you are not, you should set up a static IP address.

Good_patch · August 18, 2009, 10:13:19 PM

192.168.2.1 is what i use to access my router page but 192.168.2.2 is what i need to use when i re-enter it.

Good_patch · August 18, 2009, 10:20:37 PM

Please reply@

Chrono · August 18, 2009, 10:29:35 PM

Check in Blockland to make sure you're using port 28000.
This is found in advanced config I believe.

Good_patch · August 18, 2009, 10:35:51 PM

How do i get to "advanced config" ???

BobSevenSevens · August 18, 2009, 10:46:14 PM

192.168.2.1?

192.168.2.1??!!!

No, you dumbass, set it to 192.168.1.45

User was banned for this post

Chrono · August 18, 2009, 10:46:52 PM

192.168.2.1?

192.168.2.1??!!!

No, you dumbass, set it to 192.168.1.45

Ignore this post.

Have you checked your firewall?

Good_patch · August 18, 2009, 10:48:57 PM

Probobly not. ill go check now

Good_patch · August 18, 2009, 10:49:41 PM

I dont know exactly what im lookign for.

Good_patch · August 18, 2009, 10:54:45 PM

I dont see anything that is concerning.

Badspot · August 18, 2009, 11:07:13 PM

Windows firewall.

General Nick · August 19, 2009, 12:19:47 AM

Did you set a static DNS too?

Chrono · August 19, 2009, 12:55:30 AM

Did you set a static DNS too?

He is on the internet after all.