The new and improved 3D model topic!

[The Corporation]

DE's also come in .44 mag dumb

Don't forget .357 and .41 calibers!

[Ad Bot]

[Tokthree]

and that cannon shoots flaming swords...

Except the swords aren't actually on fire, they're radiating transparent orange chainsaws

[Pandan]

I give up on cars man. I just can't do it.

This looks like such bubbly stuff. I can't make cars.

[Fastlex]

This would make a really nice RC.

[Lego lad]

It's a better model than I could do :(

[Pandan]

spent an hour or so fixing it

idk there's just something that makes me rage when i see it.
i cant pin point it

[Filipe]

Maybe it's the front, try to make it more of something from that

[Pandan]

I suppose it's the front, i need a break. getting worked up over it for some reason.

[Barnabas]

You should probably make the rear wheel arch similar to the front one. The rear one seems to be made from a circle with less sides. How about making the wheel arches a little bigger, then extruding it a little to make it look more like the wheel arch on Filipe's picture? If you do that, you should probably add the little flat area which could be seen there.

You should consider moving the bottom corners of the front windscreen downwards a little more to make it follow the curvature of the cowl.

Otherwise it seems like a good base model to work from.

[Derroith]

You've got a good shape but I think it has too many bevels, otherwise I don't think it's that bad.

[The Corporation]

Smoothshade and smoothgroups. It'll look nice when you do it in the right places.

[Pandan]

Smoothshade and smoothgroups. It'll look nice when you do it in the right places.

That's a step I can't take yet. I'm still molding the actual car still.

here's a 3D preview of it's current state

http://p3d.in/wzb9K

i took barnabas and derroith's advice.
i reduced some of the beveling and redid the rear wheel well.
disclaimer: its not done, or even close to being done

[Zeblote]

That's a step I can't take yet. I'm still molding the actual car still.

here's a 3D preview of it's current state

http://p3d.in/wzb9K

i took barnabas and derroith's advice.
i reduced some of the beveling and redid the rear wheel well.
disclaimer: its not done, or even close to being done

Stick a large antenna on the back and you got a cool rc car.

[Pandan]

Stick a large antenna on the back and you got a cool rc car.

stop.



currently assigning smoothing groups and doing the tire.
any input on the tire?

[Robo Dude]

This makes me want to learn to model so Badly :( I tried a couple times, just don't understand it.