Author Topic: Macros  (Read 35425 times)

What are these I see people using them nd they get there work done fast?
« Last Edit: October 09, 2011, 04:57:07 PM by Badspot »

First off, go to you controls.
Ctrl O > At the top click Controls.
Scroll down on the left until you see the following, or something like that:
- Start macro recording
- Playback macro

Set a button for each one of them.
Let's say I use:
- Start macro recording = W
- Playback macro = R

I would lay down a ghost brick.
Press W to start recording.
At this point, you may move the brick and build, and Blockland will record it.
Here is what you should NOT do when recording a macro.
- Change your view
- place or move a brick when not in the original view started
- Hammer a brick
- Use the spray can to directly color a brick

Use Undo to delete the brick instead of hammering it, and switch paint can colors before placing a brick in order to color it.

After your done placing your bricks, Press W again.
At this point the recording stops.

Lay down the ghost brick the same way you did when you started, and where you want the built to be.
press R, and the build will be built, don't rotate your view while the build is building.
If you are Admin macros work faster.
Good luck!


Let's say I use:
- Start macro recording = W


Erm..isnt W walking forward lol?


Let's say I use:
- Start macro recording = W


Erm..isnt W walking forward lol?
Yes, that was just an example.

Someone should sticky that guide.

HOw do ya "sticky" it?

HOw do ya "sticky" it?
An admin puts some glue on it to make it stay at the top of the Help section.

OHHH SO MR. BADSPOT I THINK????

Please sticky this i found it VERY helpfull.

 :cookieMonster:

Add some symbols, "they're all the rage"

I recommend removing the start and stop recording binds, I believe they are F3 and F4, and replacing them with toggle and playback macro.

some people do use the recording thing.. i have no idea what for, but some people use them

My guide was more in depth, so if any stickying is to be done, sticky mine =p

My guide was more in depth, so if any stickying is to be done, sticky mine =p

But mine is also a simple and step by step guide.
2 Users found it helpful, and learned from it. :D

Pls2note: You can't respawn your ghost brick whilst recording or it just goes horribly wrong.

Plus, if you'd like to save your macros for use at another time you can use the Macro Saver Add-On which is found Here