Going out on an arm and leg here.. but does anyone know how to fix "DRAM refresh error" on my old "vintage" 486 machine? It will boot up, emit one short beep, and continue the POST as normal and works normally. 1 short beep means "DRAM refresh error". When it boots it should emit one long beep. Also, when I press the Turbo button the motherboard will emit 3 short beeps and all video signal will be lost requiring a hard reset.
Specs:
Am486DX4 Enhanced 120mhz
32MB RAM
1GB hard drive
Trident 9680 2MB