the Creative Commons Attribution 4.0 License.

the Creative Commons Attribution 4.0 License.

# Cascading transitions in the climate system

### Mark M. Dekker

### Anna S. von der Heydt

### Henk A. Dijkstra

We introduce a framework of cascading tipping, i.e. a sequence of abrupt transitions occurring because a transition in one subsystem changes the background conditions for another subsystem. A mathematical framework of elementary deterministic cascading tipping points in autonomous dynamical systems is presented containing the double-fold, fold–Hopf, Hopf–fold and double-Hopf as the most generic cases. Statistical indicators which can be used as early warning indicators of cascading tipping events in stochastic, non-stationary systems are suggested. The concept of cascading tipping is illustrated through a conceptual model of the coupled North Atlantic Ocean – El Niño–Southern Oscillation (ENSO) system, demonstrating the possibility of such cascading events in the climate system.

- Article
(1791 KB) - Full-text XML
- BibTeX
- EndNote

Earth's climate system consists of several subsystems, e.g. the ocean, the atmosphere, ice and land, which are coupled through fluxes of momentum, mass and heat. Each of these subsystems is characterized by specific processes, on very different timescales, determining the evolution of its observables. For example, processes in the atmosphere occur on much smaller timescales than in the ocean; hence, in weather prediction the upper ocean sets the background state for the evolution of the atmosphere. Similarly, in equatorial ocean–atmosphere dynamics associated with the El Niño–Southern Oscillation (ENSO) phenomenon, the global meridional overturning circulation can be considered a background state, as it evolves on a much larger timescale.

This notion that one subsystem provides a background state for the evolution of another subsystem is important when critical transitions are considered. In the climate system, a number of tipping elements have been identified (Lenton et al., 2008 give an overview of these), where changes in observables can occur relatively rapidly compared to the changes in their forcing near so-called “tipping points”. Examples of tipping elements are the Atlantic meridional overturning circulation (AMOC) (Stommel, 1961), the Arctic sea ice (Bathiany et al., 2016), monsoon patterns, mid-latitude atmospheric flow (Barriopedro et al., 2006), vegetation cover (Hirota et al., 2011) and more local systems like coral reefs and permafrost. When one subsystem undergoes a transition, which changes the background state of another subsystem, a transition may also be induced in that second subsystem. Such dynamical interactions which lead to coupled transitions are examples of “tipping cascades” or “domino effects” (Kriegler et al., 2009; Lenton and Williams, 2013).

Many tipping points have been analysed in separate subsystems, both for phenomena of the present-day climate (Bathiany et al., 2016; Lenton, 2011), and for past climates (such as the abrupt cooling of the Younger Dryas, Livina and Lenton, 2007, and the desertification of the Sahel region, Kutzbach et al., 1996). However, less attention has been paid to the interaction between transitions in different subsystems. For example, when the AMOC collapses, precipitation patterns may change such that the equilibrium structure of the vegetation cover in the Amazon rainforest is shifted (Aleina et al., 2013). This may result in another transition, concerned with forest growth or dieback. Another example is the influence of the AMOC on the trade winds (through meridional sea surface temperature gradients), which in turn influence the amplitude of ENSO. In models, a collapse of the AMOC has been found to intensify ENSO (Dong and Sutton, 2007; Lenton and Williams, 2013; Timmermann et al., 2007), although there are also other effects that would weaken ENSO (Timmermann et al., 2005).

An example in past climates is the coupling between the ocean's overturning circulation and
land ice. The rapid glaciation of the Antarctic continent around the Eocene–Oligocene boundary (34 Ma) is often explained
in terms of a CO_{2} threshold being reached that allowed a major ice sheet to grow
(DeConto and Pollard, 2003; Gasson et al., 2014). However, a two-step signal is found in the oxygen
isotopic ratio, *δ*^{18}O, which is attributed to a deep-sea temperature drop followed by the (slower) growth
of the Antarctic Ice Sheet (AIS). One suggestion to explain the two-step transition is that
the deep-sea temperature drop was related to a change in the
pattern of the global MOC (Tigchelaar et al., 2011). The ice sheet
formation is then argued to have been driven by decreasing atmospheric CO_{2}
(Pearson et al., 2009). The switch in MOC (first tipping) led to the changes in
the atmospheric CO_{2} (e.g. Elsworth et al., 2017) which caused the growth
of the AIS (second tipping). This leads to the question of whether a cascading tipping
event occurred.

In the last few years, much work has been carried out to formulate statistical indicators and early warning signals of tipping points. A system close to a critical transition shows features of a “critical slowing down” (Dakos et al., 2008; Kuehn, 2011; Scheffer et al., 2009). In the vicinity of the tipping point, the system slowly loses its ability to recover from small perturbations. This results in increased variance, auto-correlation and potentially also increased skewness and flickering (Scheffer et al., 2009). Various methods providing a specific scalar and a threshold when approaching the transition have been suggested, such as degenerate fingerprinting (Held and Kleinen, 2004; Thompson and Sieber, 2011) and detrended fluctuation analysis (DFA) (Livina and Lenton, 2007; Peng et al., 1994).

When considering cascading tipping points, the auto-correlation of two time series and their
interaction need to be analysed simultaneously. Podnobik and Stanley (2008) proposed an altered
form of DFA to assess the cross-correlation between two non-stationary time series and
called this method detrended cross-correlation analysis (DCCA). In the computation of
the fluctuation function, they used cross-covariance instead of auto-covariance and fit
this to a power law. This concept is further extended by defining a coefficient
*ρ*_{DCCA} that accounts for the auto-covariance of the individual time
series (Yuan et al., 2015; Zhou, 2008). However, no statistical analysis or indicators
have yet been formulated for cascading tipping events.

In this paper, we provide a quantitative approach to cascading tipping events. We start with a mathematical framework to formulate elementary cascading tipping points (Sect. 2). Next, we discuss statistical metrics to analyse, diagnose and potentially predict cascading transitions, and apply them to ensemble simulations of the elementary cascading tipping points (Sect. 3). Finally, we apply the new concepts to an example within the climate system: the potential cascading tipping mechanism between the AMOC and ENSO (Sect. 4). We summarize and discuss our findings in Sect. 5.

In the climate system, tipping points are usually related to rapid transitions, where an observable in the climate system may change abruptly in a relatively short time compared with changes in the forcing of the observable. Such rapid changes usually involve transitions from one equilibrium state to another, which can often be explained using classical bifurcation theory for autonomous dynamical systems. To a certain extent, these concepts can also be applied to non-autonomous systems (so-called slow–fast systems) when the time variation of parameters can be viewed as a slow external forcing (Kuehn, 2011). They form the basics for understanding phenomena such as noise-induced tipping (Thompson and Sieber, 2011) and rate-dependent tipping (Ashwin et al., 2012).

In this section, we present a mathematical framework for simple cascading transitions, which acts as a first step towards analysing the more complex real-world transitions. We focus on bifurcation-induced tipping points, and consider two types of bifurcations that are thought to be relevant to mechanisms of abrupt changes in the climate system; the back-to-back saddle-node bifurcation is often used to explain transitions between two coexisting equilibria (multi-stable systems), while the Hopf bifurcation can explain the appearance of oscillatory behaviour (Thompson and Stewart, 2002). Therefore, abrupt change in the system appears as a consequence of a parameter crossing a specific critical value at the bifurcation point.

A back-to-back saddle-node bifurcation (two saddle-nodes connected by a common unstable branch) generically occurs in physical systems (that have bounded states) when one parameter varies and the simplest dynamical system has a bifurcation that is described by

where the *a*_{i} ($i\in \mathrm{1},\phantom{\rule{0.125em}{0ex}}\mathrm{2}$) are constants, *ϕ* is a parameter, *x*
is the state variable and *t* is time. There are multiple equilibria in the
system if and only if *a*_{1}<0, *a*_{2}>0 and within the parameter interval
$\left|\mathit{\varphi}\right|<\left(\right(-\mathrm{4}{a}_{\mathrm{1}}^{\mathrm{3}}{a}_{\mathrm{2}}^{\mathrm{3}})/(\mathrm{27}{a}_{\mathrm{1}}^{\mathrm{4}}){)}^{\mathrm{1}/\mathrm{2}}$. In this case, the back-to-back
saddle-node bifurcations occur at ${\mathit{\varphi}}_{c}=\pm \left(\right(-\mathrm{4}{a}_{\mathrm{1}}^{\mathrm{3}}{a}_{\mathrm{2}}^{\mathrm{3}})/(\mathrm{27}{a}_{\mathrm{1}}^{\mathrm{4}}){)}^{\mathrm{1}/\mathrm{2}}$. In the following, we often use the terms
“fold bifurcation” and “saddle-node bifurcation”, although in practise we
only use “back-to-back” saddle-node bifurcations.

A Hopf bifurcation also generically occurs in physical systems, and the simplest dynamical system in which it occurs when one parameter is varied is described by

where, again, ${a}_{i},{b}_{i},i=\mathrm{1},\mathrm{2}$ are constants, *ϕ* is the parameter, (*x*, *y*) is the state
vector and *t* is time. The state vector satisfying (Eq. 2) reaches a stable periodic orbit
if and only if *a*_{1}*b*_{1}<0 and *ϕ*>0; the transition from steady to periodic occurs at *ϕ*=0.

There are two other bifurcations when one parameter is varied (the transcritical and pitchfork bifurcations); however, these bifurcations are non-generic because special conditions must hold (e.g. symmetry) and so they are not considered here. Using the saddle-node and Hopf bifurcations, cascading tipping can be viewed as a combination of two coupled subsystems, where each subsystem undergoes one of these two types of bifurcations. Combining these bifurcations leads to four types of cascading tipping, which are discussed in the following.

Coupling two systems introduces a direction to the cascade and we take account of this by defining a “leading” system, which during its transition changes a parameter (that is, the coupling term) in the “following” system. The changing parameter in the following system can then bring the following system closer to a bifurcation point, potentially even resulting in a second transition. In this section, we only look at deterministic cases, which do not allow for noise to play a role in the tipping. Therefore, transitions in the leading system result in a changed coupling term that can lead to transitions in the following system. In bifurcation diagrams versus forcing, the bifurcation points (for deterministic systems) can overlap. However, the transitions are distinguishable in transients, because the following system always tips after the completion of the first transition. This is why we show the bifurcation diagrams of both systems versus forcing (Fig. 1) and an example of a transient (Fig. 2) for each type. They will be discussed in more detail below.

## 2.1 Double-fold cascade

The most intuitive system that has the potential to undergo a cascading tipping event is a system where both the leading and the following system have saddle-node bifurcations. Analogous to Eq. (1), a dynamical system containing a double fold cascade is then

where *x* is the state vector of the leading system, *y* is the state vector of the
following system, *a*_{i},*b*_{i} ($i\in \mathrm{1},\phantom{\rule{0.125em}{0ex}}\mathrm{2}$) are constants, and *ϕ* is a
parameter in the leading system. The key here is that the function *γ*,
which serves as a parameter in the following system, depends on the leading
system. The most simple coupling between the two systems is represented by
$\mathit{\gamma}\left(x\right)={\mathit{\gamma}}_{\mathrm{1}}+{\mathit{\gamma}}_{\mathrm{2}}x$. Observe that a change in the forcing
parameter *ϕ* can induce a transition in *x*, which may affect the
coupling function *γ* such that *y* also undergoes a transition. We
would like to emphasize that the forcing *ϕ* does not directly affect *y*,
and that *y* is only affected through a change in *x* (which is effectively only significant when
*x* tips).

Implementing this system with the values shown in Table 1 gives
insight in the system's equilibrium structure (Fig. 1a)
and transient behaviour (example in Fig. 2a). When *ϕ*
is changed moving through the bistable regime of the leading system the
coupling moves the following system through its own bistable regime (see
Table 1). Figure 1a and b show the
equilibria of the leading (versus *ϕ*) and following systems (versus
*γ*), respectively, showing the bistable regime in the centre of the
figure, embedded in the saddle-node structure. Varying *ϕ* alters the
state of the leading system, which affects the state of the following system through the coupling *γ*.
This results in the existence of four stable
states in the following system of the bistable regime of the leading system:
two per state of the leading system, as shown in Fig. 1i.
The leading system's state acts as a background condition modulating the
position of the following system's equilibria; therefore, in case of
transition, the leading system's state may drastically reposition the equilibria of the following
system. This is intuitively visible in Fig. 2a, where a
time series example of the dynamical system in Eq. (3) shows a
cascading tipping event (parameters shown in Table 1). When
the leading system (black) is forced (by changing *ϕ*) to move from a
bistable to a monostable regime, it transits towards a new equilibrium.
During this transition, the following system (red) is affected and
leaves the regime in which it had four possible equilibria; it also transits
to a different state.

## 2.2 Fold–Hopf cascade

The second type of cascading tipping event involves a saddle-node bifurcation in the leading system and a subsequent Hopf bifurcation in the following system. Using analogous notation as in Eq. (3), the simplest system that captures this so-called fold–Hopf cascade is

where *x* is again the state vector of the leading system, and (*y*, *z*) is the state vector of the
following system. By slowly varying the parameter *ϕ* (e.g. linearly as *ϕ*(*t*))
the leading system moves through its bistable regime (see Table 1
for parameter values) and via the coupling $\mathit{\gamma}\left(x\right)={\mathit{\gamma}}_{\mathrm{1}}+{\mathit{\gamma}}_{\mathrm{2}}x$
forces the following system across the Hopf bifurcation point.

The bifurcation structure of the leading system of Eq. (4),
using the parameters stated in Table 1, is displayed in
Fig. 1b. As in Fig. 1a, this system's
bifurcation diagram shows a saddle-node structure. The following system
in Fig. 1f, now undergoes a Hopf bifurcation and
subsequent oscillatory behaviour. In Fig. 1j, it can be
seen that increasing *ϕ* on the lower branch of the leading system regime
will still result in a stationary equilibrium for the following system. When
increasing *ϕ* across *ϕ*_{c}, the leading system moves towards another
state (seen in Fig. 1b) and the coupling *γ*
increases (across *γ*_{c} in Fig. 1f). An
oscillation then occurs in the following system. This mechanism makes it possible
for steady and oscillatory states to coexist on the right side of the Hopf
bifurcation in Fig. 1j. An example of a time series
showing a fold–Hopf cascading event is displayed in Fig. 2b.
A transition in the leading system (black) brings the following system
(red/yellow) into an unstable equilibrium that eventually leads to an
oscillatory state.

## 2.3 Hopf–fold cascade

A third type of cascading event involves a Hopf bifurcation in the leading system and a subsequent saddle-node bifurcation in the following system. Using similar notation to the previous subsection, the simplest system with a Hopf–fold cascade (see Table 1 for parameter values) is given by

where (*x*, *y*) is the state vector of the leading system, and *z* is the state vector of the
following system. Again, we can slowly increase *ϕ* so that the leading
system (*x*, *y*) crosses a Hopf bifurcation; via the coupling $\mathit{\gamma}\left(x\right)={\mathit{\gamma}}_{\mathrm{1}}+{\mathit{\gamma}}_{\mathrm{2}}x$ the following system is then moved through its bistable
regime and a fold is reached in *z*.

Figure 1c contains the typical bifurcation structure of the
leading system in Eq. (5), containing a Hopf bifurcation separating
a stationary from an oscillatory regime. The following system's equilibrium
structure for varying *γ* is given by Fig. 1g. In
this particular configuration, for any negative *ϕ* there are multiple
stable equilibria, as seen in Fig. 1k. This makes sense, as
*ϕ* only affects the following system via its impact on the leading
system, and for negative *ϕ* the leading system remains constant. At
*ϕ*=0, the Hopf bifurcation in the leading system is reached and (*x*, *y*)
starts oscillating. The following system oscillates a little along with the
leading system due to the oscillatory changing value of *γ*.

When *ϕ* increases more, the amplitude of the leading system's oscillation
grows, which eventually causes *γ* to cross the threshold; the
following system then leaves its bistable regime (be it temporarily as *γ*
will be reduced again due to the oscillation). This forces the following
system into its upper branch, as can be seen in Fig. 1g.
The upper branch's stable oscillation ends at *ϕ*≈0.8 (in
Fig. 1k), because the amplitude becomes large enough for
the system to swap between multiple equilibria. An example of such a
cascading transition event can be seen in Fig. 2c, where
an oscillation starts in the leading system (black/grey). A
particular phase of this oscillation then causes the following system (red) to transit into the second
equilibrium.

## 2.4 Double-Hopf cascade

A fourth type of cascading tipping event discussed here involves a Hopf bifurcation in the leading system and a subsequent Hopf bifurcation in the following system. Using analogous notation to the previous subsections, this double Hopf cascade is captured by the following dynamical system:

where (*x*, *y*) is the state vector of the leading system, and (*u*, *v*) is the state vector of the following system. If *ϕ*
forces (*x*, *y*) such that it crosses the Hopf bifurcation point, the coupling $\mathit{\gamma}\left(x\right)={\mathit{\gamma}}_{\mathrm{1}}+{\mathit{\gamma}}_{\mathrm{2}}x$ causes a crossing of the second Hopf bifurcation in (*u*, *v*).

Figure 1d and h show the bifurcation diagrams of the
leading and following systems, with supercritical Hopf bifurcations. The
following system (in Fig. 1l) is stationary for many
values of *ϕ*, up to the point that the leading system starts oscillating,
which for high enough values of *ϕ* is large enough to make the following
system cross the Hopf bifurcation. However, *γ* oscillates with the
leading system (for *ϕ*>0). This means that oscillatory behaviour in the following system can only be
expected in a particular part of the leading system's oscillation period.
This interaction between the two oscillations result in torus bifurcations for particular values of *ϕ*. An
example of a time series showing a double-Hopf cascading transition is
shown in Fig. 2d. After a (slow) oscillation in the
leading system (black/grey) has started, a (fast) oscillation in the
following system (red/yellow) arises in particular phases of the slow
oscillation.

In the previous section we formulated elementary deterministic dynamical systems that can exhibit cascading tipping. In order to detect tipping events from, for example, observed time series in real systems, we need to detect whether a system is close to a critical transition. In general, systems close to critical transition recover more slowly from perturbations, which in turn increases memory in the time series. This leads to the phenomenon of “critical slowing down” prior to bifurcation points. In this section, we simulate cascading tipping events to (a) study the statistical character of such events, (b) diagnose (post-tipping) whether tipping events are causally related and (c) take a first step towards statistical indicators for the prediction of cascading tipping events.

## 3.1 Methods for single tipping points

Several methods have been suggested for the analysis of time series to detect the approach of a single tipping point. For saddle-node bifurcations, the key features of a time series such as this is a critical slowing down. This can be investigated using standard quantities such as increasing auto-correlation (e.g. the lag-1 auto-correlation), increasing variance and increasing skewness (Held and Kleinen, 2004; Kuehn, 2011; Scheffer et al., 2009). Although critical slowing down near critical transitions is a general feature of (even chaotic) dynamical systems (Tantet et al., 2018), the standard metrics like auto-correlation at lag 1 and variance do not always provide an early warning signal (e.g. in Greenland ice core data in Livina and Lenton, 2007). Hence, more complicated indicators have been introduced, such as (i) degenerate fingerprinting (DF) and (ii) the detrended fluctuation analysis (DFA) (Held and Kleinen, 2004; Livina and Lenton, 2007; Peng et al., 1994; Thompson and Sieber, 2011). DFA is argued to be a solution to the problem that the simple lag-1 auto-correlation does not capture the approach to a transition in highly non-stationary data in long time series (Livina and Lenton, 2007; Peng et al., 1994). The latter is characterized by high auto-correlation due to the gradual increase or decrease of the system itself, distorting the signal of the critical slowing down, a problem in standard metrics and DF.

As critical slowing down implies an increasing auto-regressive behaviour in
the time series prior to a transition, the memory component is increased. In
general, the first step in DF is the projection of the data fields onto the
leading EOF, which gives a time series *x*_{n} (Held and Kleinen, 2004). After
time-equidistant interpolation and detrending of the data, in the DF method
one fits the following general auto-regressive process to the time series
*x*_{n}:

where *η*_{n} is Gaussian white noise and $c=\text{exp}(-\mathit{\lambda}\mathrm{\Delta}t)$
is the AR(1) coefficient. Here *λ* can be seen as
the decay rate of perturbations in previous time steps. As the approaching of a
bifurcation point involves an increase in
memory, the value of *c* is presumed to increase towards one when
approaching a saddle-node bifurcation point.

In DFA, one first chooses an integer window size *s* and divides the
(cumulative-summed) time series *X*(*n*) into ${N}_{s}=N/s$ segments that do not
overlap, where *N* is the length of the time series. In every window, the
best polynomial fit of a chosen order is calculated. A quadratic polynomial
is used here. The squared deviation from this quadratic polynomial for every
window is summed, resulting in a measure of the auto-covariance fluctuating
around the fit:

where *X* is the detrended time series and *x*_{ν} is the best polynomial fit in segment *ν*.
Next, an average is taken over all segments to obtain the fluctuation function *F*(*s*):

which depends solely on *s*. The long-range auto-correlations can now be recognized
by fitting the fluctuation function to a power law and looking at the resulting
DFA-exponent *α*, according to

For *α*≤0.5, there is no long-term correlation and the fluctuations are indistinguishable from
white noise. However, when *α*>0.5, there are long-term correlations present and for
*α*≥1.5 the system has reached a bifurcation point. In the simulations analysed
here the DFA scaling exponent is fitted explicitly for every (moving) window.

## 3.2 Methods for cascading tipping points

Cascading tipping involves two systems with their own bifurcation structure and their proximity towards bifurcation points. Although the leading system may be close to tipping, the following system might still be far from its bifurcation point and needs the critical transition of the leading system to even come close to this point; this makes the behaviour of the following system more prone to noise, less dependent on the leading system and less auto-correlated prior to the first tipping. This is why the general measures for single tipping events cannot be used, nor can regular cross (Pearson) correlation. The reason for this is that the following and leading systems do not have a one-to-one relationship (that is, weakly Pearson correlated), but are rather coupled through specific parameters, which is only visible in long-range correlations.

When approaching a cascading tipping point, the long-range cross-correlation
between the leading state *x* and the following state *y* is expected to
increase. The state *x* becomes more auto-correlated and is less susceptible
to noise, and therefore influences *y* through the coupling in a more robust
way. To find long-range cross-correlations, the so-called
“detrended cross-correlation analysis” (DCCA) method was developed
(Podnobik and Stanley, 2008; Zebende, 2011; Zhang et al., 2001; Zhou, 2008). Instead of using the
auto-covariance to calculate the fluctuation function,
as is used in Eq. (8), one uses the cross-covariance as follows:

The symbols in Eq. (11) are similar to Eq. (8). With this function, one can calculate the fluctuation function and subsequent power-law scaling coefficient (Podnobik and Stanley, 2008; Zhang et al., 2001), similar to Eq. (9).

A variation on this method was proposed by Zebende (2011) and involves the
ratio between ${F}_{\mathrm{DCCA}}^{\mathrm{2}}$ and *F*_{DFA} of the two systems. Specifically,
one chooses a certain segment size *s* and computes

which measures the level of the long-term cross-correlation between variable *x*
and *y*; the quantity *ρ*_{DCCA} has values between −1 and 1.

There are several a priori limitations of using the power-law scaling
coefficient and *ρ*_{DCCA}. First of all, the results are sensitive to
choices of the maximum segment size (*s*) and the window size, induced by the
noise in our simulations. Making the window size too large decreases the
possibility of seeing any development prior to the tipping points, as windows
including the tipping event itself are biased by strong auto-correlation and
the (tipping) trend in the data. However, making the window size too small
increases the uncertainty in the exponential fit. Similarly, adding small
segments co-determining the exponential fit makes the method prone to noise,
while larger segments are limited by the window size and computation time. In
our simulations, window sizes of 120 data points, and segments sizes between
10 and 60 within those windows were used to calculate the fluctuations per
segment size and to calculate *F*(*s*) (Eq. 9). More research is
needed to find the optimal values for the window and segment sizes, and to potentially
reduce this limitation in the analysis of cascading transitions. Another
limitation of using the power-law scaling coefficient and *ρ*_{DCCA} is
that the way that the two systems are coupled (e.g. linearity, with or without
temporal lag) affects how an evolution in the leading system affects its
cross-correlation with the following system in both magnitude and time.
Finally, to observe trends in these metrics, the signal in the
cross-correlation between the two systems has to overcome the (partly
mutually independent) noise. However, close to critical transition, the
recovery from noise actually decreases, making the often subtle
“change” in the detrended cross-correlation harder to distinguish from
noise. These limitations may make the detrended cross-correlation metrics
less useful in applications, but trends in the detrended cross-correlation
metrics might still act as early warnings for cascading transitions, as shown
in the next section.

## 3.3 Simulations

In this section we discuss the previously described metrics applied in ensemble simulations of cascading transition events. This provides insight into the statistical characteristics of these events, the causal relation between tipping of both systems and the potential prediction of these events. We focus on the double-fold and the fold–Hopf cascading tipping cases for multiple reasons. First, these cases are most illustrative in terms of relation to physical systems. Second, in these cases the leading system starts with a fold bifurcation, which creates a clear threshold for the start of the event (which is convenient for analysis purposes).

### 3.3.1 Double-fold cascading tipping

To simulate these events and use statistical indicators, noise has to be included. The system of equations used here is

where in addition to Eq. (3), *ζ*_{x},*ζ*_{y} are Gaussian
white noise terms. We simulate an ensemble of 100 members with the
parameter settings and initial conditions as displayed in
Table 2. The results of this ensemble are displayed in Fig. 3.
Running windows containing the transition are shaded white as
these data are misleading when one wants to know what happens before the
bifurcation points. We make the distinction between the leading-transitional
period (LTP), which is the time series before the tipping point in the
leading system, and the following-transitional period (FTP), which is the
time series between the first tipping point and the tipping point in the
following system. The FTP can be seen as an in-between state that is stable
for both systems, although the following system is close to bifurcation,
meaning it is rather prone to noise. Therefore, the duration of this state is
highly unpredictable. However, as we will see in this section, the FTP does
provide information regarding the diagnosis of a potential second transition.

In the LTP, we clearly see the gradual increasing leading system's variance, the AR(1) coefficient and DFA scaling coefficient. These are all evidence of the leading system slowly approaching a bifurcation point, according to the change in the parameter. There is not much evidence of long-range auto-correlations in the time series of the following system, as its variance is low and the DFA scaling exponent remains below 0.5, pointing towards the fact that the detrended fluctuations are statistically white noise. The AR(1) coefficient of the following system does increase just prior to the first tipping, but it also stays small (compared to unity).

The detrended cross-correlation scaling exponent (abbreviated here as DXA) does give >0.5 values, but the range throughout the ensemble members is too large most of the time to see any structural development when approaching the bifurcation point. During the leading system's transition, a strong increase is visible, pointing towards rather strong cross-correlated behaviour during this period (as the following system also shifts its equilibrium a little).

The quantity *ρ*_{DCCA} seems to attain a small positive value (around
0.3) and stays relatively constant throughout the whole time interval. One
important aspect of the calculation of *ρ*_{DCCA}, as we found by
experimentation, is that the values are very sensitive to the segment size *s*
and the moving window size. The moving window determines the amount of data
that is available to find long-range correlations, and the segment size has a
strong impact on the accuracy of the fits and on the related segmented
fluctuations. Due to the fact that we need a temporal evolution of the
statistical indicators in this type of problem, we need moving windows and, thus, encounter
a problem. As these indicators (DXA and *ρ*_{DCCA}) have been successfully applied
in simpler systems (Podnobik and Stanley, 2008; Zebende, 2011; Zhang et al., 2001; Zhou, 2008), more research on the
sensitivity of the indicators with respect to the segment size and moving
window size may lead to more robust results.

During the FTP, the variance, AR(1) and DFA of the leading system are
strongly reduced. However, the gradual increase of the following system's
variance, AR(1) coefficient and DFA scaling coefficient are definitely
visible, pointing towards the approach of a bifurcation in the following
system. Also notable is the contrast in the DFA of the following system
before and after the tipping of *x*. The DFA of *y* goes from a
white-noise regime (around 0.5) before the tipping of *x* towards a regime
where the detrended fluctuations point to long-range auto-correlations
after the tipping of *x* (1–1.5). This illustrates the relation between the
leading system's state and the following system's DFA scaling exponent. The DXA remains relatively high, but overall no structural development
is seen in this graph. The quantity *ρ*_{DCCA} exhibits the same behaviour as
in the LTP, most likely due to the previously mentioned reasons.

To assess the consequences of the cascading effect on the statistics mentioned, we compare the results with a case where the system (Eq. 13) does not undergo a tipping in the following system (so only one transition remains). The resulting ensemble results are shown in Fig. 4. The most important differences between a regular cascading event and a single tipping event can be found when comparing the variance, AR(1) and DFA scaling coefficient changes between LTP and FTP (or the period after the first transition). During the LTP, the leading system is close to transition and has strong auto-regressive behaviour, whilst the following system is far from its bifurcation point. During the FTP, the following system generally gains memory because it is brought closer to its transition point, and the leading system loses memory because it just arrived at a new state. Therefore, we expect that from the LTP towards the FTP, the variance, AR(1) and DFA will decrease in the leading system, and increase in the following system.

To quantify this effect, Table 3 shows the ratios of the
different quantities, indicated by *Q*, during the FTP and LTP phases
(${\stackrel{\mathrm{\u203e}}{Q}}_{\mathrm{FTP}}/{\stackrel{\mathrm{\u203e}}{Q}}_{\mathrm{LTP}}$), for the cases “with” a second tipping
(corresponding to runs shown in Fig. 3) and
“without” second tipping (Fig. 4). All ensemble
members are included in these values, accounting for a mean and standard
deviation of the ratios. As expected, the leading system's auto-regressive
metrics decrease in both cases, which is visible in the fact that the mean values of the ratios of
the leading system's auto-regressive variables are lower than 1. Furthermore, as
expected, the following system's auto-regressive behaviour increases (ratios >1) in both cases; however, it is striking that in the case of a cascading tipping
event (with second tipping), the following system's ratios are much
higher than those in the case of a single tipping event (without
second tipping). To investigate whether the difference in the ratios between
single or double tipping is indeed significant, a Student's *t* test was carried out.
The results are shown in Table 4. The high *p* values for the
leading system's ratios indicate no significant difference between single or
double tipping, but the low *p* values for the following system's ratios
indicate a significant difference. This shows the potential of using the
ratio of auto-regressive variables before and after a transition to assess
whether a cascading transition may follow. Further research is needed to
quantify this expectation and to assess the sensitivity of these ratios to
the system's parameters.

### 3.3.2 Fold–Hopf cascading tipping

Many statistical indicators have been specifically applied on fold bifurcations, because these transitions show a clear sign of critical slowing down and increased auto-correlation; this is due to their irreversibility and the process of going from one equilibrium towards another. A state approaching a Hopf bifurcation reacts differently to perturbations than a state approaching a saddle-node bifurcation. Therefore, we will consider the fold–Hopf cascade in the light of the previously described statistical indicators. For this, we use the following stochastic dynamical system:

This system is similar to Eq. (4), but white noise is added through the terms
*ζ*_{x}, *ζ*_{y} and *ζ*_{z}. We used an ensemble of 100 simulations with
the parameter settings and initial conditions as displayed in
Table 2. The results of the ensemble are shown in Fig. 5. Here, we
do not make the distinction between the LTP and the FTP, because in contrast
to the double-fold cascade, the following system undergoes a transition that
is easily reversed and the system is either stationary or oscillating. We
subtract a running average from the states and calculate the statistics from
those series to prevent the oscillation from dominating the signal in the
auto-correlation. The following system (red) is quickly drawn towards the
equilibrium state $(y,z)=(\mathrm{0},\mathrm{0})$, and the leading system (black) is in a
steady state. During the time leading up to the bifurcation point, the variance,
AR(1) coefficient and DFA of the leading system *x* gradually increase, as is
expected as we force this system towards its bifurcation point. It also seems
that the AR(1) of the following system slightly increases during this period.

After the transition of the leading system, the oscillation of the following
system immediately starts due to noise. The variance and AR(1) of the
following system after the bifurcation are strongly increased with respect to
before the bifurcation, despite the removal of the running average to eliminate
the oscillation's signal. On average, the DFA scaling exponent of the following system also
increases, which relates it to the leading system's
state. The DXA sharply increases just prior to the critical transition, although
it retains relatively high values throughout the whole time series. The reason
behind this might be the low level of noise that is chosen, or other
simulation-specific parameters. It could also due to the fact the
following system has a high, weakly varying DFA scaling exponent on average,
which in turn might affect the height and variability of the
cross-correlation. The *ρ*_{DCCA} coefficient remains positive and small,
as in the double-fold case. Again, this may have to do with the choice
of window and segment sizes.

In this section, we present an application of the concept of cascading tipping (the fold–Hopf case). This application reflects the fact that cascading transitions are not only a purely mathematical concept, but also occur in idealized physical models. Here, we consider cascading tipping in a model that couples the Atlantic meridional overturning circulation (AMOC) and the El Niño–Southern Oscillation (ENSO).

## 4.1 Background

To demonstrate and quantify the coupling between the AMOC and ENSO, we use output from global climate model simulations. In the ESSENCE project (Ensemble SimulationS of Extreme weather events under Nonlinear Climate changE) several simulations were performed using the ECHAM5/MPI-OM coupled climate model, including so-called “hosing” experiments Sterl et al. (2008), where fresh water is added around Greenland to mimic ice sheet melting.

From these climate model simulations we used two ensembles; the first is
the “standard” experiment, where greenhouse gases evolve according to
observations and from the year 2000 onwards follow the SRES-A1b scenario
(experiment name SRES-A1b). The second ensemble is the same as the standard
experiment but has additional freshwater input (1 Sv =10^{6} m^{3} s^{−1}) around Greenland from the
end of the year 2000 onwards (experiment name HOSING-1). The HOSING-1 ensemble
contains a classical hosing experiment, following the procedure from
Jungclaus et al. (2006). Five runs of each ensemble are chosen, specifically
runs 041–045 of the HOSING-1 and runs 021–025 of the SRES-A1b ensemble. The
temporal resolution used is monthly data between 1950 and 2100. The spatial
fields are on a curvilinear grid, with 40 vertical levels in the ocean. We
use deseasonalised data because we are interested in interannual variability,
not in seasonal variability, as El Niño is associated with these
timescales. We use the maximum of the Atlantic meridional
overturning stream function at 35^{∘} N as an AMOC index, and the
NINO3.4 index as an ENSO index, which is the average SST over the region 170–120^{∘} W by 5^{∘} S–5^{∘} N.

The results for the evolution of the AMOC and ENSO are shown in Fig. 6. It is clearly visible that the AMOC decreases strongly in the hosing experiments, by approximately 85 %. Table 5 compares statistical properties for the time intervals before and after 2001 (which is the year at which the hosing starts). We use the non-anomaly statistics, as this gives us information about the differences in the mean. We do note that we only use five runs per ensemble, which means that the uncertainty is not statistically robust. We only present it in Table 5 to give the reader an idea of the range of the variables among the different runs.

It is visible from Table 5 that the variability of NINO3.4 increases (bold numbers) if we compare the 1950–2000 and 2001–2100 periods. This increased variability is visible in both the standard and the HOSING-1 runs. However, the variability is much stronger in the HOSING-1 experiment, indicating that the decrease of the AMOC indeed has an amplifying effect on ENSO. The large difference between the standard and hosing runs suggests that the NINO3.4 index changed in the hosing experiment, potentially as a consequence of the decrease of the AMOC. As the first tipping is artificially induced (without any measurable critical slowing down), and the models used here are far more complex than the simple dynamical systems we discussed in previous sections, the question of whether cascading tipping is actually occurring in these runs is beyond the scope of this paper. We only use this data to justify the coupling of AMOC and ENSO.

Several mechanisms have been suggested in the literature regarding the coupling between the AMOC and ENSO. The first mechanism is concerned with oceanic waves. A colder North Atlantic creates density anomalies that induce the southward propagation of oceanic Kelvin waves (along the American coast) across the Equator. In western Africa, this energy radiates as Rossby waves towards the north and south, which induces Kelvin waves to move along the tip of southern Africa into the Indian Ocean, which eventually reach the Pacific. Consequently, the eastern equatorial Pacific thermocline deepens on a decadal timescale. This deepening has a weakening effect on the amplitude of ENSO (Timmermann et al., 2005).

The second mechanism is concerned with the trade winds. Cooling in the northern
tropical Atlantic (due to AMOC weakening) induces anticyclonic atmospheric
circulation (Xie et al., 2007) that intensifies the northerly trade winds over
the northeastern tropical Pacific. This leads to a southward displacement of
the Pacific intertropical convergence zone (Zhang and Delworth, 2005) and generates a meridional SST
anomaly due to anomalous heat transport and the wind–evaporation–SST feedback
in the Pacific. Also, Dong and Sutton (2007) found an atmospheric coupling through
Rossby waves sent into the northeast tropical Pacific. This is in line with
Dijkstra and Neelin (1995), who argued that part of the contribution to the zonal
wind stress, *τ*_{ext}, arises from processes outside the tropical
Pacific. The result of the wind-stress coupling between the two systems is
an intensification of ENSO, and this mechanism is argued to be stronger than
the coupling through oceanic waves (Timmermann et al., 2005).

## 4.2 Models and coupling

To study the possible cascading transition through the wind-stress coupling, we use a
conceptual model. For the AMOC, the classical Stommel box model (Stommel, 1961)
is used. It consists of a polar (subscript p) and an equatorial box (subscript e), both
with a temperature *T* and salinity *S* coupled by a density-driven flow rate.
The state variables are then defined as $\mathrm{\Delta}T={T}_{\mathrm{e}}-{T}_{\mathrm{p}}$ and $\mathrm{\Delta}S={S}_{\mathrm{e}}-{S}_{\mathrm{p}}$. The time evolution of these variables is as
follows (Cessi, 1994):

where the first term in the temperature equation refers to relaxation towards
a background temperature, and the second term refers to density-driven
meridional transport. Specifically, *t*_{r} is the surface temperature restoring
timescale and *θ*_{0} is the equator-to-pole atmospheric temperature
difference. *Q*(Δ*ρ*) is the transport function, which is calculated from
a diffusion timescale and the meridional density gradient Δ*ρ*. In the
salinity equation, *S*_{0} is a reference salinity, and *H* is the ocean depth. The parameter
*F*_{s} is the freshwater flux, which can be used as a bifurcation parameter.
The stream function

represents the strength of the AMOC, with *γ*_{0}>0 a
flow constant, *ρ*_{0} a reference density and *α*_{T}, *α*_{S}
the thermal and haline expansion/contraction coefficients.

For the El Niño–Southern Oscillation, we use the conceptual model as proposed in
Timmermann et al. (2003). This model has a state vector consisting of the temperature
of the western Pacific *T*_{1}, the temperature of the eastern Pacific *T*_{2} and the
thermocline depth of the western Pacific *h*_{1}. The model finds is based on the
Zebiak and Cane (1987) ENSO model, with a two-strip and two-box approximation,
and a shallow-water model for the upper ocean with a fixed mixed layer depth.

where 1∕*α* is a typical thermal damping timescale, *T*_{sub} is the
temperature below the mixed layer, *H*_{m} and *L* are the depths of the mixed
layer and the basin width, respectively, *w* is upwelling velocity and *u* is
atmospheric zonal surface wind linear to wind stress:
$u/(L/\mathrm{2})=\mathit{\u03f5}\mathit{\beta}\mathit{\tau}$ and $w/{H}_{\mathrm{m}}=-\mathit{\zeta}\mathit{\beta}\mathit{\tau}$. The parameters
*ϵ* and *ζ* refer to the strength of zonal and vertical advection
(bifurcation parameters).

The subsurface temperature *T*_{sub} is parameterized as

where *h*_{2} is the east equatorial Pacific thermocline depth (calculated as
the deviation from a reference depth *H*), *z*_{0} is the depth for which *w* becomes
its characteristic value and *h*^{*} is the sharpness of the thermocline. The
thermocline depths are calculated as follows:

where *b* is the efficiency of the wind stress *τ* to drive the thermocline tilt.
For further details, we refer to Timmermann et al. (2003). In the Stommel–Timmermann models, we use the standard parameter settings, as given in the
references, unless stated otherwise.

We couple the AMOC and ENSO models through the relation between the Atlantic
meridional temperature gradient (in the Stommel model) and the Pacific zonal
wind stress (in the Timmermann model); the Pacific zonal wind stress mechanism,
which is the more important of the two abovementioned mechanisms, is
found in the literature, and described in the previous section. Even in a simplified
model, the relation between wind stress and meridional temperature gradient
is physically justified: thermal wind balance indicates a direct connection
between the adjustment of wind stress to changes in the meridional
temperature gradient. In the Timmermann model, the zonal wind stress *τ*
is expressed as

with the *μ*∕*β* parameters that control the influence of the zonal
temperature gradient on the wind stress set to 0.02 Pa⋅ K^{−1}. We
add an external wind stress term *τ*_{ext} that is dependent on the
meridional temperature gradient in the Atlantic Δ*T*, i.e.

with a negative relation between *τ*_{ext} and the Atlantic meridional SST gradient
Δ*T* as we know from the literature described above (a stronger positive Δ*T*
results in stronger easterlies and thus a negative *τ*_{ext}). Note that both the
Pacific wind stress *τ* and specifically its external part *τ*_{ext} should always be negative.
The total wind stress is negative because this area (at low altitude) is strictly dominated
by easterly winds, and *τ*_{ext} is negative because, through the meridional
temperature gradient, it reflects the influence of the zonal mean Hadley cell on
the equatorial Pacific. Physically, the Hadley cell only induces negative zonal
wind stress in this region.

In the coupling (Eq. 21), we fix *β* and vary *μ* as the coupling parameter.
For *τ*_{ext} we take a linear relation as follows:

where all coefficients are constant over time. The parameters *α*_{τ}
and *γ*_{τ} can be estimated from the ESSENCE data as discussed in
Sect. 4.1; *τ*_{0} reflects the constant part in the
zonal mean wind stress, which we subtract because we are interested in the
contribution of changes in the meridional overturning. Using five ESSENCE
runs per ensemble for both the standard forcing and hosing-experiment,
respectively, Δ*T* is computed as the absolute difference between the
SST in the North Atlantic area (50–60^{∘} N × 50–20^{∘} W) and
the equatorial Atlantic region (0–20^{∘} N × 45–20^{∘} W). For
the wind stress *τ*_{ext}, the zonally integrated wind stress averaged
over the 0–10^{∘} N region is taken. In Fig. 7, 5-year
running means of annual averages are plotted for the hosing simulations (in
red) and the standard simulations (in black). Clearly, *τ*_{ext} decreases
as Δ*T* increases, meaning that when the AMOC collapses (larger Δ*T*) the wind stress *τ*_{ext} becomes more negative and the external part
of the trade winds increases. However, we also note that the spread in the
simulation data is large, which can, in part, be attributed to internal
variability present in the simulations. The coefficients *α*_{τ} and
*γ*_{τ} were found to be (from a linear fit) −0.000376 Pa ⋅ ^{∘}C^{−1} and
−0.0119 Pa. By looking at the Δ*T* regime in Fig. 7, *τ*_{0} is chosen to be the wind stress at 19 ^{∘}C:
${\mathit{\tau}}_{\mathrm{0}}={\mathit{\alpha}}_{\mathit{\tau}}\cdot \mathrm{19}+{\mathit{\gamma}}_{\mathit{\tau}}\approx -\mathrm{0.0190}$ Pa. This results
in a final quantized expression for the coupling:

## 4.3 Results

The AMOC model's bifurcation diagrams are shown in Fig. 8a
and b, and clearly display a saddle-node structure. For an interval of values of
the freshwater flux *F*_{s} the system has multiple equilibria, whilst for other
values only one equilibrium remains. This means that when we are in the
high-Ψ branch and *F*_{s} is large enough, the system can make a
transition to the low-Ψ branch. This is depicted by the blue arrow in
Fig. 8b.

The bifurcation diagram of the ENSO model with *τ*_{ext} as a parameter is
shown in Fig. 8c. The bifurcation diagrams
become much simpler than in the original Timmermann et al. (2003) model, the
reason for this is extensively discussed in Dijkstra and Neelin (1995). Figure 8d shows the influence of *μ* for the position of the
oscillatory regime: on each branch, two Hopf bifurcations can be found and
the *μ* value of the first Hopf bifurcation decreases with more negative
*τ*_{ext}. This indicates that a Hopf bifurcation can be crossed if
*τ*_{ext} is decreased, while *μ* is kept constant. In other words, for
the right value of *μ*, the eastern Pacific SST starts oscillating
(El Niño “intensifies”) when the easterly external wind is increased. For
the coupled model, we use *μ*=0.00146.

Using *τ*_{ext} to couple the AMOC and ENSO models, we performed
simulations with Δ*t*=0.1 days and the Runge–Kutta fourth-order
integration method. To initiate the collapse of the overturning, a freshwater
forcing *F*_{s} is applied in the form of a step function:

Using the coupling of Eq. (23), we attain the results shown in
Fig. 9. The exact quantification of the coupling partly
modulates which effect the collapse of the AMOC has on ENSO. For the chosen
coupling, the collapse of the overturning leads to the crossing of the first
Hopf bifurcation point in the following system, and an oscillation starts
growing. As is visible in Fig. 6, the relation between
Δ*T* and *τ* has quite some spread, which implies a large
uncertainty in the values of *α*_{τ} and *γ*_{τ}. We would like
to stress that the regime in which the Hopf bifurcation is crossed is
dependent on multiple variables, such as these coupling parameters.
Running the forward integration of the coupled model for values between
${\mathit{\alpha}}_{\mathit{\tau}}=-\mathrm{0.00041}$ and ${\mathit{\alpha}}_{\mathit{\tau}}=-\mathrm{0.00033}$, uncovers the fact that
(ceteris paribus), for higher (lower) values of *α*_{τ}, the
oscillation indeed becomes weaker (stronger), finally resulting in a disappearance of the
oscillation at ${\mathit{\alpha}}_{\mathit{\tau}}\approx -\mathrm{0.000335}$ at a time step of 0.25 days.

Despite the parameter sensitivity, this is a typical illustration of the fold–Hopf cascading behaviour discussed in earlier sections. This re-enforces the possibility that cascading transitions are possible in real physical systems.

In this paper, we introduced the concept of cascading tipping, which can occur when a transition in a leading system alters background conditions for a following system that then undergoes a transition. We presented a mathematical framework around this concept, using generic bifurcations (saddle-node and Hopf) in both leading and following systems. Four types of deterministic dynamical systems with the possibility for cascading events were formulated, including the double-fold cascade, the fold–Hopf cascade, the Hopf–fold cascade and the double-Hopf cascade. In all cases we assumed a linear coupling between the following and leading system. The double-fold coupled system has previously been considered in another context (Brummitt et al., 2015), where it was also noted that not all subsystems undergo tipping (“hopping”) in systems with more than two coupled fold cascades. Moreover, stochastically coupled multi-stable systems have been considered in networks, where different types of domino effects can occur depending on the synchrony of the transition in the different network nodes (Ashwin et al., 2017; Creaser et al., 2018). Here we only consider two coupled systems, but allow different types of bifurcations, and the systems are physically coupled in a directional way.

We discussed statistical indicators and analysis tools for cascading
tipping points. Indicators for cascading tipping points are found in
detrended cross-correlation analysis (DCCA) and a special case of
extrapolation using the DFA of the following system. These tools were applied
in simulations involving both the double-fold and fold–Hopf cascades. The
increased variance, AR(1) and DFA scaling exponent are clearly found in each
case of single tipping. The cross-correlation indicators (DCCA and
*ρ*_{DCCA}) did not evolve much throughout the time series, which
indicates their insensitivity with respect to the proximity to single tipping
points. Several limitations on the use of these variables have been
mentioned. However, it seems that these metrics are highly sensitive to
window and segment sizes, which means that their potential as early warnings of
cascading transition events is inconclusive. The ratios of auto-regressive
metrics before and after the first transition seem to be a stronger warning
of cascading transitions. More research is needed to exactly quantify these
metrics.

The concept of cascading tipping was applied to study the behaviour of a model describing a link between the Atlantic meridional overturning circulation (MOC) and ENSO. We modelled this using a coupling between the Stommel (1961) model and the Timmermann et al. (2003) ENSO model by a meridional temperature gradient-dependent term in the external wind stress of the ENSO model. Through analysis of the bifurcation diagrams and simulations, a cascading tipping event is indeed possible within this model in the form of the fold–Hopf cascade. Obviously, both models are highly idealized and more detailed models of both AMOC and ENSO are needed to demonstrate the occurrence of such a cascading transition in the climate system.

A potential example of a double-fold cascade, which was not further treated here,
could be the impact of a bistable MOC on the (bistable) land ice formation on the Antarctic continent.
In this case the coupling exists through the atmospheric CO_{2} concentration, which depends on
mixing and circulation in the ocean while strongly determining the existence of an ice sheet DeConto and Pollard (2003).
During the Eocene–Oligocene transition, where a large ice sheet grew on Antarctica, a
two-step signal is observed in the deep-sea *δ*^{18}O ratio, suggesting two abrupt transitions.
Using a box model by Gildor and Tziperman (2000), Tigchelaar et al. (2011) showed that a
two-step signal can be produced by (first) a MOC transition which changes the
CO_{2} concentration meaning that a transition occurs in the land-ice model.
Although from a physical perspective, this is a potential example of a
cascading transition, we make no claim about whether such a transition likely
occurred at the Eocene–Oligocene transition. Here, more detailed models
are also needed and transition are expected to be more complicated
(Tantet et al., 2018).

These two applications reflect the relevance of this paper. There are likely many cases in which these cascading events occur in climate and therefore highlight the importance of the topic. Future research will point out whether these events are likely to happen in the future climate and whether these effects also occur in fields other than climate science. Of course, this paper covers the very basics of deterministic cascading events. However, one can imagine a wide range of phenomena if more complicated transitions between attractors are considered and when noise is included. For example, when a leading chaotic system is coupled to a deterministic following system with a saddle-node bifurcation structure, a slight change in the chaotic attractor may change the background conditions for the following system such that it undergoes a transition. An application here may be the effect of a mid-latitude atmospheric jet on the Atlantic MOC. We hope that this paper will stimulate more research on the various types of cascading tipping and also on the development of well-suited indicators and early warnings of such events.

Models, analysis scripts and outputs are available on request from the corresponding author.

All authors developed the research idea, MMD carried out the computations and performed the analysis. All authors discussed the results and contributed to writing the paper.

The authors declare that they have no conflict of interest.

Anna S. von der Heydt and Henk A. Dijkstra acknowledge support from the
Netherlands Earth System Science Centre (NESSC), financially supported by the
Ministry of Education, Culture and Science (OCW), grant no. 024.002.001.
Anna S. von der Heydt thanks Peter Ashwin for discussions related to this
work. She is also grateful to the University of Exeter and the EPSRC funded
Past Earth Network (grant no. EP/M008363/1) for funding an extended visit to
the University of Exeter during the Summer of 2017.

Edited by: Valerio Lucarini

Reviewed by:
Alexis Tantet and one anonymous referee

Aleina, F. C., Baudena, M., D'Andrea, F., and Provenzale, A.: Multiple equilibria on planet Dune: Climate-vegetation dynamics on a sandy planet, Tellus B, 65, 17662, https://doi.org/10.3402/tellusb.v65i0.17662, 2013. a

Ashwin, P., Wieczorek, S., Vitolo, R., and Cox, P.: Tipping points in open systems: Bifurcation, noise-induced and rate-dependent examples in the climate system, Philos. T. Roy. Soc. A, 370, 1166–1184, https://doi.org/10.1098/rsta.2011.0306, 2012. a

Ashwin, P., Creaser, J., and Tsaneva-Atanasova, K.: Fast and slow domino effects in transient network dynamics, Phys. Rev. E, 96, 052309, https://doi.org/10.1103/PhysRevE.96.052309, 2017. a

Barriopedro, D., García-Herrera, R., Lupo, A. R., and Hernández, E.: A Climatology of Northern Hemisphere Blocking, J. Climate, 19, 1042–1063, https://doi.org/10.1175/JCLI3678.1, 2006. a

Bathiany, S., van der Bolt, B., Williamson, M. S., Lenton, T. M., Scheffer, M., van Nes, E. H., and Notz, D.: Statistical indicators of Arctic sea-ice stability – prospects and limitations, The Cryosphere, 10, 1631–1645, https://doi.org/10.5194/tc-10-1631-2016, 2016. a, b

Brummitt, C. D., Barnett, G., and D'Souza, R. M.: Coupled catastrophes: sudden shifts cascade and hop among interdependent systems, J. R. Soc. Interface, 12, https://doi.org/10.1098/rsif.2015.0712, 2015. a

Cessi, P.: A simple box model of stochastically forced thermohaline flow, J. Phys. Oceanogr., 24, 1911–1920, 1994. a

Creaser, J., Tsaneva-Atanasova, K., and Ashwin, P.: Sequential noise-induced escapes for oscillatory network dynamics, SIAM J. Appl. Dyn. Syst., 17, 500–525, https://doi.org/10.1137/17M1126412, 2018. a

Dakos, V., Scheffer, M., van Nes, E. H., Brovkin, V., Petoukhov, V., and Held, H.: Slowing down as an early warning signal for abrupt climate change, P. Natl. Acad. Sci. USA, 105, 14308–14312, https://doi.org/10.1073/pnas.0802430105, 2008. a

DeConto, R. M. and Pollard, D.: Rapid Cenozoic glaciation of Antarctica
induced by declining atmopsheric CO_{2}, Nature, 421, 245–249, 2003. a, b

Dijkstra, H. A. and Neelin, D.: Ocean-Atmosphere Interaction and the Tropical Climatology. Part II: Why the Pacific Cold Tongue is in the East, J. Climate, 8, 1343–1359, 1995. a, b

Dong, B. and Sutton, R.: Enhancement of ENSO Variability by a Weakened Atlantic Thermohaline Circulation in a Coupled GCM, J. Climate, 20, 4920–4939, https://doi.org/10.1175/JCLI4284.1, 2007. a, b

Elsworth, G., Galbraith, E., Halverson, G., and Yang, S.: Enhanced weathering
and CO_{2} drawdown caused by latest Eocene strengthening of the Atlantic
meridional overturning circulation, Nat. Geosci., 10, 213–216,
https://doi.org/10.1038/ngeo2888, 2017. a

Gasson, E., Lunt, D. J., DeConto, R., Goldner, A., Heinemann, M., Huber, M., LeGrande, A. N., Pollard, D., Sagoo, N.,
Siddall, M., Winguth, A., and Valdes, P. J.: Uncertainties in the modelled CO_{2} threshold for Antarctic glaciation,
Clim. Past, 10, 451–466, https://doi.org/10.5194/cp-10-451-2014, 2014. a

Gildor, H. and Tziperman, E.: Sea ice as the glacial cycles' Climate switch: role of seasonal and orbital forcing, Paleoceanography, 15, 605–615, https://doi.org/10.1029/1999PA000461, 2000. a

Held, H. and Kleinen, T.: Detection of climate system bifurcations by degenerate fingerprinting, Geophys. Res. Lett., 31, l23207, https://doi.org/10.1029/2004GL020972, 2004. a, b, c, d

Hirota, M., Holmgren, M., Van Nes, E. H., and Scheffer, M.: Global Resilience of Tropical Forest and Savanna to Critical Transitions, Science, 334, 232–235, https://doi.org/10.1126/science.1210657, 2011. a

Jungclaus, J. H., Haak, H., Esch, M., Roeckner, E., and Marotzke, J.: Will Greenland melting halt the thermohaline circulation?, Geophys. Res. Lett., 33, l17708, https://doi.org/10.1029/2006GL026815, 2006. a

Kriegler, E., Hall, J. W., Held, H., Dawson, R., and Schellnhuber, H.: Imprecise Probability Assessment of Tipping Points in the Climate System, P. Natl. Acad. Sci. USA, 106, 5041–5046, 2009. a

Kuehn, C.: A mathematical framework for critical transitions: Bifurcations, fast-slow systems and stochastic dynamics, Physica D, 240, 1020–1035, https://doi.org/10.1016/j.physd.2011.02.012, 2011. a, b, c

Kutzbach, J., Bonan, G., Foley, J., and Harrison, S.: Vegetation and soil feedbacks on the response of the African monsoon to orbital forcing in the early to middle Holocene, Nature, 384, 623–626, https://doi.org/10.1038/384623a0, 1996. a

Lenton, T. M.: Early Warning of Climate Tipping Points, Nat. Clim. Change, 1, 201–209, 2011. a

Lenton, T. M. and Williams, H. T.: On the origin of planetary-scale tipping points, Trends Ecol. Evol., 28, 380–382, https://doi.org/10.1016/j.tree.2013.06.001, 2013. a, b

Lenton, T. M., Held, H., Kriegler, E., Hall, J. W., Lucht, W., Rahmstorf, S., and Schellnhuber, H. J.: Tipping elements in the Earth's climate system, P. Natl. Acad. Sci. USA, 105, 1786–1793, https://doi.org/10.1073/pnas.0705414105, 2008. a

Livina, V. and Lenton, T.: A modified method for detecting incipient bifurcations in a dynamical system, Geophys. Res. Lett., 34, l03712, https://doi.org/10.1029/2006GL028672, 2007. a, b, c, d, e

Pearson, P., Foster, G., and Wade, B.: Atmospheric carbon dioxide through the Eocene–Oligocene climate transition, Nature, 461, 1110–1113, 2009. a

Peng, C.-K., Buldyrev, S. V., Havlin, S., Simons, M., Stanley, H. E., and Goldberger, A. L.: Mosaic organization of DNA nucleotides, Phys. Rev. E, 49, 1685–1689, https://doi.org/10.1103/PhysRevE.49.1685, 1994. a, b, c

Podnobik, B. and Stanley, H.: Detrended Cross-Correlation Analysis: A New Method for Analyzing Two Non-stationary Time Series, Phys. Rev. Lett., 100, 084102, https://doi.org/10.1103/PhysRevLett.100.084102, 2008. a, b, c, d

Scheffer, M., Bascompte, J., Brock, W., Brovkin, V., Carpenter, S., Dakos, V., Held, H., van Nes, E., Rietkerk, M., and Sugihara, G.: Early-warning signals for critical transitions, Nature, 461, 53–59, https://doi.org/10.1038/nature08227, 2009. a, b, c

Sterl, A., Severijns, C., Dijkstra, H. A., Hazeleger, W., van Oldenborgh, G. J., van den Broeke, M., Burgers, G., van den Hurk, B., van Leeuwen, P. J., and van Velthoven, P.: When can we expect extremely high surface temperatures?, Geophys. Res. Lett., 35, L14703, https://doi.org/10.1029/2008GL034071, 2008. a

Stommel, H.: Thermohaline Convection with Two Stable Regimes of Flow, Tellus A, 13, 224–230, https://doi.org/10.1111/j.2153-3490.1961.tb00079.x, 1961. a, b, c

Tantet, A., Lucarini, V., and Dijkstra, H. A.: Resonances in a Chaotic Attractor Crisis of the Lorenz Flow, J. Stat. Phys., 170, 584–616, https://doi.org/10.1007/s10955-017-1938-0, 2018. a, b

Thompson, J. and Stewart, H.: Nonlinear Dynamics and Chaos, Wiley, available at: https://books.google.nl/books?id=vQvu-5VPkmcC (last access: 2 November 2018), 2002. a

Thompson, J. M. T. and Sieber, J.: Predicting Climate Tipping as a noisy bifurcation: a review, Int. J. Bifurcat. Chaos, 21, 399–423, https://doi.org/10.1142/S0218127411028519, 2011. a, b, c

Tigchelaar, M., von der Heydt, A. S., and Dijkstra, H. A.: A new mechanism for the two-step *δ*^{18}O signal at the
Eocene-Oligocene boundary, Clim. Past, 7, 235–247, https://doi.org/10.5194/cp-7-235-2011, 2011. a, b

Timmermann, A., Jin, F., and Abshagen, J.: A Nonlinear Theory for El Niño Bursting, J. Atmos. Sci., 60, 152–165, https://doi.org/10.1175/1520-0469(2003)060<0152:ANTFEN>2.0.CO;2, 2003. a, b, c, d, e

Timmermann, A., An, S.-I., Krebs, U., and Goosse, H.: ENSO Suppression due to Weakening of the North Atlantic Thermohaline Circulation, J. Climate, 18, 3122–3139, https://doi.org/10.1175/JCLI3495.1, 2005. a, b, c

Timmermann, A., Okumura, Y., An, S.-I., Clement, A., Dong, B., Guilyardi, E., Hu, A., Jungclaus, J. H., Renold, M., Stocker, T. F., Stouffer, R. J., Sutton, R., Xie, S.-P., and Yin, J.: The Influence of a Weakening of the Atlantic Meridional Overturning Circulation on ENSO, J. Climate, 20, 4899–4919, https://doi.org/10.1175/JCLI4283.1, 2007. a

Xie, S.-P., Miyama, T., Wang, Y., Xu, H., de Szoeke, S. P., Small, R. J. O., Richards, K. J., Mochizuki, T., and Awaji, T.: A Regional Ocean–Atmosphere Model for Eastern Pacific Climate: Toward Reducing Tropical Biases, J. Climate, 20, 1504–1522, https://doi.org/10.1175/JCLI4080.1, 2007. a

Yuan, N., Zuntau, F., Zhang, H., Piao, L., Xoplaki, E., and Luterbacher, J.: Detrended Partial-Cross-Correlation Analysis: A New Method for Analyzing Correlations in Complex System, Sci. Rep., 5, 8143, https://doi.org/10.1038/srep08143, 2015. a

Zebende, G.: {DCCA} cross-correlation coefficient: Quantifying level of cross-correlation, Physica A, 390, 614–618, https://doi.org/10.1016/j.physa.2010.10.022, 2011. a, b, c, d

Zebiak, S. E. and Cane, M. A.: A Model El Niño–Southern Oscillation, Mon. Weather Rev., 115, 2262–2278, https://doi.org/10.1175/1520-0493(1987)115<2262:AMENO>2.0.CO;2, 1987. a

Zhang, D., Lee, T. N., Johns, W. E., Liu, C.-T., and Zantopp, R.: The Kuroshio East of Taiwan: Modes of Variability and Relationship to Interior Ocean Mesoscale Eddies, J. Phys. Oceanogr., 31, 1054–1074, https://doi.org/10.1175/1520-0485(2001)031<1054:TKEOTM>2.0.CO;2, 2001. a, b, c

Zhang, R. and Delworth, T. L.: Simulated Tropical Response to a Substantial Weakening of the Atlantic Thermohaline Circulation, J. Climate, 18, 1853–1860, https://doi.org/10.1175/JCLI3460.1, 2005. a

Zhou, W.: Multifractal detrended cross-correlation analysis for two nonstationary signals, Phys. Rev., 77, 066211, https://doi.org/10.1103/PhysRevE.77.066211, 2008. a, b, c